Product Detail
For facade media and entrance signage, the P10 Outdoor LED Cabinet is the model we quote most often: 960×960 mm cabinets, P10 pitch, 6,500 cd/m², IP65 sealing and 1920-3840 Hz refresh. Factory-direct from our Shenzhen line, 7-12 working days for standard cabinets, spare modules in every carton.


P10 Outdoor LED Cabinet: key features
- Front-service magnetic modules – a dead module is swapped from the front in minutes, no cabinet removal.
- 1920-3840 Hz refresh rate – keeps colour stable on camera, which matters for televised advertising.
- About 30.4 kg per cabinet, 280 W/m² average draw – power and structure can be sized from these two numbers before the layout is final.
- Nationstar LEDs on a steel cabinet cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
P10 Outdoor LED Cabinet technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P10 (10 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 96×96 px (9,216) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP65 |
| LED lamp | Nationstar |
| Cabinet material | steel cabinet |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 15 m minimum, 30 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P10 Outdoor LED Cabinet. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this P10 Outdoor LED Cabinet, start from whole cabinets: a 4×3 build gives a 3.84×2.88 m screen, 384×288 pixels (0.11 MP), about 336 kg of cabinet and an average load near 3,100 W. Add one row and the same cabinet family gives 3.84 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
R, G, B Sperate Powered Technology, R voltage 2.5V, G & B with 3.5V power Voltage. Which save Energy and Reduce Heat Generation.
Full Color P10 Outdoor LED Display LED Advertisement Board 960MMx960MM, RGB SMD P10 Full Color Outdoor Advertising LED Display Panels


Where the P10 Outdoor LED Cabinet is used
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P10 Outdoor LED Cabinet: frequently asked questions
Will this P10 Outdoor LED Cabinet survive a coastal or high-humidity site?
Yes, with the coastal option: epoxy coating on the cabinet, stainless screws, conformal-coated driver boards. Humidity above 85% year-round is the case where that option pays for itself.
What is the lead time for a P10 Outdoor LED Cabinet order?
7-12 working days for standard P10 cabinets, 15-20 days if the order includes steel structure and on-site commissioning. Sea freight to most ports adds 18-35 days depending on the route.
How many spare modules should I keep?
2-3% of the total module count, minimum two. For this cabinet that means one spare per 40 cabinets, or a full spare cabinet for a wall under 20 m².
Can you build this P10 Outdoor LED Cabinet in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
Request a price for the P10 Outdoor LED Cabinet
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Outdoor Fixed Installation range, and you can compare p3.91 outdoor led cabinet, p6 outdoor led cabinet. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







