Product Detail
For facade media and entrance signage, the P3.91 Outdoor LED Cabinet is the model we quote most often: 960×960 mm cabinets, P3.91 pitch, 6,500 cd/m², IP65 sealing and 1920-3840 Hz refresh. Factory-direct from our Shenzhen line, 7-12 working days for standard cabinets, spare modules in every carton.


P3.91 Outdoor LED Cabinet: key features
- Front-service magnetic modules – a dead module is swapped from the front in minutes, no cabinet removal.
- 1920-3840 Hz refresh rate – no scan lines when a phone or broadcast camera pans across the screen.
- About 30.4 kg per cabinet, 273 W/m² average draw – a 3.84×2.88 m wall weighs roughly 336 kg and pulls 3,000 W.
- Epistar LEDs on a die-cast aluminum cabinet – both parts are held as spares in Shenzhen for five years after the order.
P3.91 Outdoor LED Cabinet technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P3.91 (3.91 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 246×246 px (60,516) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/4 |
| Protection | IP65 |
| LED lamp | Epistar |
| Cabinet material | die-cast aluminum |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 273 W/m² |
| Viewing distance | 5.9 m minimum, 12 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P3.91 Outdoor LED Cabinet. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P3.91 Outdoor LED Cabinet is simple enough to check before you order: 960÷3.91 = 246 pixels across each cabinet and 960÷3.91 = 246 down, so six cabinets in a row resolve 1,476 pixels at 5.76 m wide. Viewing distance follows the pitch – 5.9 m before the pixel structure disappears, 12 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
Excellent heat dissipation design and performance. It has low noise and does not require external fans or air conditioners. It has the characteristics of light weight and low power consumption, which can reduce the labor cost of installation and operation.
100% tested before shipment, the best quality LED chip tubes CREE, SILAN, OPTO, EPISTAR ensure high brightness and long life, leading the industry.


Where the P3.91 Outdoor LED Cabinet is used
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P3.91 Outdoor LED Cabinet: frequently asked questions
How is the P3.91 Outdoor LED Cabinet shipped, and what spare parts come with it?
Each 960×960 mm cabinet is crated on its edge in a plywood case with foam corners, and the carton list matches the cabinet numbers on the layout drawing. A 3.84×2.88 m wall ships in roughly 9 cases plus one spares box.
Is the P3.91 Outdoor LED Cabinet CE and RoHS certified?
Yes, with CE, RoHS and FCC reports issued against the actual BOM. Certificates are sent with the PI so your customs broker has them before the container arrives.
What brightness do I need for this P3.91 Outdoor LED Cabinet?
This model is set to 6,500 cd/m². For a north-facing wall or an indoor position, 800-1,500 cd/m² is enough; direct sun needs 5,000 cd/m² and above. Keep 3x headroom over ambient light and let the auto-dimming sensor handle the rest.
What are the payment and MOQ terms?
30/70 T/T is standard, LC at sight accepted, and sample orders of one cabinet are possible at a small premium so you can test the panel before a full wall.
Request a price for the P3.91 Outdoor LED Cabinet
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Outdoor Fixed Installation range, and you can compare p6 outdoor led cabinet, p6 outdoor led cabinet. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.






