LEYARLED — Focus On LED Screen Field For More Than 10 Years.

P5 Outdoor Fixed Installation Magnesium 960mmx960mm LED Cabinet

P5 Outdoor Fixed Installation Magnesium 960mmx960mm LED Cabinet

  • Customized Size
  • Free tech guide
  • 5% Spare Part, Power Supply, Receiver cards included.
  • Lead time: 15-21 working days.

Product Detail

This P5 Outdoor LED Cabinet pairs a 960×960 mm cabinet with 18 modules and 192×192 pixel resolution per panel. At P5 it is readable from 7.5 m, puts out 6,500 cd/m², and carries a 5-year warranty on modules, power supplies and receiving cards.

P5 Outdoor LED Cabinet 960x960mm outdoor LED display - Leyarled

P5 Outdoor LED Cabinet: key features

  • Front-service magnetic modules – a dead module is swapped from the front in minutes, no cabinet removal.
  • 1920-3840 Hz refresh rate – no scan lines when a phone or broadcast camera pans across the screen.
  • About 30.4 kg per cabinet, 273 W/m² average draw – power and structure can be sized from these two numbers before the layout is final.
  • Kinglight LEDs on a magnesium alloy cabinet – both parts are held as spares in Shenzhen for five years after the order.

P5 Outdoor LED Cabinet technical specification

Parameter Value
Pixel pitch P5 (5 mm)
Module size 320×160 mm
Module count 18 per cabinet
Cabinet size 960×960 mm
Resolution per cabinet 192×192 px (36,864)
Brightness 6,500 cd/m² (auto dimming)
Refresh rate 1920-3840 Hz
Scan mode constant current, high scan
Protection IP65
LED lamp Kinglight
Cabinet material magnesium alloy
Cabinet weight about 30.4 kg (33 kg/m²)
Average power about 273 W/m²
Viewing distance 7.5 m minimum, 15 m comfortable
Lifespan 100,000 hours
Warranty 5 years

The table shows the standard build for this P5 Outdoor LED Cabinet. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.

How the numbers work on a real wall

To size this P5 Outdoor LED Cabinet, start from whole cabinets: a 4×3 build gives a 3.84×2.88 m screen, 768×576 pixels (0.44 MP), about 336 kg of cabinet and an average load near 3,000 W. Add one row and the same cabinet family gives 3.84 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.

Where the P5 Outdoor LED Cabinet is used

  • Entrances and plazas – welcoming screens that run brand and wayfinding content.
  • Car parks and petrol stations – high-brightness panels with automatic dimming.
  • Sport and event venues – score and sponsor boards.
  • Building facades – permanent media walls on commercial buildings.

Installation and service access

Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.

For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 5-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.

P5 Outdoor LED Cabinet: frequently asked questions

Will this P5 Outdoor LED Cabinet survive a coastal or high-humidity site?

The cabinet is IP65 with a breathable pressure valve, and for coastal projects we add an anti-corrosion coating plus stainless fixings. Wash the front with a soft brush and deionised water every 6-12 months to keep salt off the mask.

What is the lead time for a P5 Outdoor LED Cabinet order?

7-12 working days for standard P5 cabinets, 15-20 days if the order includes steel structure and on-site commissioning. Sea freight to most ports adds 18-35 days depending on the route.

How many spare modules should I keep?

Budget 2-3% of modules plus one power supply per 20 cabinets. A spare module is a five-minute swap, so the stock is insurance against downtime, not a repair plan.

Can you build this P5 Outdoor LED Cabinet in a custom size?

Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.

Request a price for the P5 Outdoor LED Cabinet

Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under LED Cabinet range, and you can compare p4 outdoor led cabinet, led cabinet. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.

Get In Touch With Us

We are glad to work together with you and finally bring you the satisfied products.

  • Reply within 12 hours, 24/7 online service
  • Free solution design according to your project size
  • OEM & ODM accepted, logo printing on panel and package
  • 6-year warranty and lifetime technical support

sales@leyarled.com

Send Your Inquiry

We will reply to you within 12 working hours.

By using this form you agree with the storage and handling of your data by this website.

WeChat QR code WeChat +86 189 2343 2534 liujinmiao@wehchi.com WhatsApp: +86 189 2343 2534
fixed installation magnesium alloy 960mmx960mm cabinet
P5 Outdoor Fixed Installation Magnesium 960mmx960mm LED Cabinet