Product Detail
The P6 Outdoor LED Display Screen from Leyarled is a 960×960 mm outdoor LED display for facade media and entrance signage, built around a P6 screen that resolves 25,600 pixels per cabinet. Cabinets are sealed to IP65, run 6,500 cd/m² with 1920-3840 Hz refresh, and ship with the layout drawing, control configuration and spare modules already matched to the order.


P6 Outdoor LED Display Screen: key features
- Factory calibration before packing – each cabinet carries its own calibration file for field re-tuning.
- 25,600 pixels per cabinet (P6, 960×960 mm) – a 4×3 wall lands at 640×480 (0.31 MP) without any custom cutting.
- NovaStar and ColorLight compatible control – sending cards, processors and cloud players can be sourced locally.
- IP65 sealed cabinet with pressure valve – the breathable valve equalises pressure so gaskets are not stressed.
P6 Outdoor LED Display Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P6 (6 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 160×160 px (25,600) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/8 |
| Protection | IP65 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 273 W/m² |
| Viewing distance | 9 m minimum, 18 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P6 Outdoor LED Display Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P6 Outdoor LED Display Screen is simple enough to check before you order: 960÷6 = 160 pixels across each cabinet and 960÷6 = 160 down, so six cabinets in a row resolve 960 pixels at 5.76 m wide. Viewing distance follows the pitch – 9 m before the pixel structure disappears, 18 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
The high-brightness of 6000 nits to 9000 nits can be seen from all directions, even when facing direct sunlight, there is no delay or smear phenomenon, maintaining an ultra-wide field of view and smoother images.
Use durable and high brightness, high-quality plastic package 3 in 1 LED SMD, the maximum viewing angle on the vertical and horizontal lines is 140 degrees, the display coverage area is larger, there is no dead angle, no color cast, and the image is always perfect and seamless. Uniform and consistent, always keep the best viewing angle.


Where the P6 Outdoor LED Display Screen is used
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P6 Outdoor LED Display Screen: frequently asked questions
Which control system does the P6 Outdoor LED Display Screen use?
Standard is a NovaStar sending card with a ColorLight alternative on request. Input is HDMI/DVI, and cloud publishing is available if you want to update several screens from one dashboard.
Can I see this LED display running before I order?
We keep a 960×960 mm demo cabinet of the P6 build in the Shenzhen showroom and can shoot a video of it on request, including a camera pan at 1920-3840 Hz to show the refresh behaviour.
What does the 3-year warranty cover?
Modules, power supplies, receiving cards and the cabinet structure. Wear parts such as fan filters are excluded, and spare parts stay available in Shenzhen for five years after the order.
Can you put our brand on the P6 Outdoor LED Display Screen?
Yes. OEM branding covers the cabinet badge, the packing label and the manual, and the control software can be locked to your logo on request.
Request a price for the P6 Outdoor LED Display Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Advertising LED Screens range, and you can compare led display screen, outdoor led billboard. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.








