Product Detail
This P10 Stadium Perimeter LED Display pairs a 960×960 mm cabinet with 18 modules and 96×96 pixel resolution per panel. At P10 it is readable from 15 m, puts out 6,500 cd/m², and carries a 3-year warranty on modules, power supplies and receiving cards.

P10 Stadium Perimeter LED Display: key features
- Kinglight LEDs on a die-cast aluminium cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
- Factory calibration before packing – brightness and colour bins are matched across cabinets so a 40 m² wall reads as one surface.
- 9,216 pixels per cabinet (P10, 960×960 mm) – a 4×3 wall lands at 384×288 (0.11 MP) without any custom cutting.
- NovaStar and ColorLight compatible control – the control path stays one card, one processor, one content source.
P10 Stadium Perimeter LED Display technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P10 (10 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 96×96 px (9,216) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/4 |
| Protection | IP40 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 31.3 kg (34 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 15 m minimum, 30 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P10 Stadium Perimeter LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this P10 Stadium Perimeter LED Display, start from whole cabinets: a 4×3 build gives a 3.84×2.88 m screen, 384×288 pixels (0.11 MP), about 346 kg of cabinet and an average load near 3,100 W. Add one row and the same cabinet family gives 3.84 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
It is made of high-quality PC material and is not easily deformed. The new mask design makes the LED light almost zero reflection, ensuring the screen display effect;
The maximum viewing angle on the horizontal line is 160 degrees, and the maximum viewing angle on the vertical line is 160 degrees. It can be seen from every angle within this range, without brightness changes, image distortion, and color deviation.

Where the P10 Stadium Perimeter LED Display is used
- Football and soccer stadiums – pitch-side advertising boards that stay readable for broadcast cameras.
- Multi-sport arenas – basketball, athletics and hockey venues that reuse one screen across seasons.
- Race circuits – long runs of panels along the track with quick-lock frames.
- Training grounds and academies – smaller banner runs for sponsorship during practice sessions.
Installation and service access
The cabinets bolt onto a steel frame or a motorised goal-post system, and the top edge sits at roughly 900-1000 mm so players and officials are not obstructed. A front-service design keeps maintenance on the pitch side, which matters when the rear of the board faces a crowd barrier.
Protective soft-mask and anti-collision padding are recommended where players can slide into the board. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P10 Stadium Perimeter LED Display: frequently asked questions
Which control system does the P10 Stadium Perimeter LED Display use?
Standard is a NovaStar sending card with a ColorLight alternative on request. Input is HDMI/DVI, and cloud publishing is available if you want to update several screens from one dashboard.
Can I see this LED display running before I order?
We keep a 960×960 mm demo cabinet of the P10 build in the Shenzhen showroom and can shoot a video of it on request, including a camera pan at 1920-3840 Hz to show the refresh behaviour.
What does the 3-year warranty cover?
Modules, power supplies, receiving cards and the cabinet structure. Wear parts such as fan filters are excluded, and spare parts stay available in Shenzhen for five years after the order.
Can you put our brand on the P10 Stadium Perimeter LED Display?
Silkscreen on the 960×960 mm cabinet, a branded carton and a custom manual are included from 50 m²; below that we print labels only, so the MOQ stays at one square metre.
Request a price for the P10 Stadium Perimeter LED Display
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Stadium Perimeter LED Display range, and you can compare p10 stadium perimeter led display, p6.67 stadium perimeter led display. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.




WeChat