Product Detail
Leyarled builds this P8 Stadium Perimeter LED Display in Shenzhen on a 960×960 mm die-cast aluminium cabinet: P8 Nationstar LEDs, 14,400 pixels per panel, 6,500 cd/m² and IP68. It is the configuration most stadium and broadcast buyers settle on when they need sideline advertising and replay boards to run daily without a local engineer.

P8 Stadium Perimeter LED Display: key features
- 1920-3840 Hz refresh rate – no scan lines when a phone or broadcast camera pans across the screen.
- About 31.3 kg per cabinet, 280 W/m² average draw – a 3.84×2.88 m wall weighs roughly 346 kg and pulls 3,100 W.
- Nationstar LEDs on a die-cast aluminium cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
- Factory calibration before packing – each cabinet carries its own calibration file for field re-tuning.
P8 Stadium Perimeter LED Display technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P8 (8 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 120×120 px (14,400) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP68 |
| LED lamp | Nationstar |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 31.3 kg (34 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 12 m minimum, 24 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P8 Stadium Perimeter LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this P8 Stadium Perimeter LED Display, start from whole cabinets: a 4×3 build gives a 3.84×2.88 m screen, 480×360 pixels (0.17 MP), about 346 kg of cabinet and an average load near 3,100 W. Add one row and the same cabinet family gives 3.84 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
New structure design. It can meet the needs of rental, perimeter and fix installation. This multi-functional cabinets makes the new items easily and conveniently applied in different occasions. And this structure make the seam of cabinets connection much small. During hanging.
2, The mask is designed with high capacity of impact resistence. Buffering arc-surface ‘structure is applied for the mask shelter It can defuse the impact football, tennis ball and players.

Where the P8 Stadium Perimeter LED Display is used
- Training grounds and academies – smaller banner runs for sponsorship during practice sessions.
- Football and soccer stadiums – pitch-side advertising boards that stay readable for broadcast cameras.
- Multi-sport arenas – basketball, athletics and hockey venues that reuse one screen across seasons.
- Race circuits – long runs of panels along the track with quick-lock frames.
Installation and service access
The cabinets bolt onto a steel frame or a motorised goal-post system, and the top edge sits at roughly 900-1000 mm so players and officials are not obstructed. A front-service design keeps maintenance on the pitch side, which matters when the rear of the board faces a crowd barrier.
Protective soft-mask and anti-collision padding are recommended where players can slide into the board. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P8 Stadium Perimeter LED Display: frequently asked questions
How many spare modules should I keep?
Budget 2-3% of modules plus one power supply per 20 cabinets. A spare module is a five-minute swap, so the stock is insurance against downtime, not a repair plan.
Can you build this P8 Stadium Perimeter LED Display in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
Do you supply the steel structure and drawings?
The drawing pack covers anchor spacing, a 346 kg load case for a 3.84×2.88 m wall and the wind pressure for your region. A local fabricator builds to it, and we check the shop drawing before cutting starts.
How is the P8 Stadium Perimeter LED Display shipped, and what spare parts come with it?
Each 960×960 mm cabinet is crated on its edge in a plywood case with foam corners, and the carton list matches the cabinet numbers on the layout drawing. A 3.84×2.88 m wall ships in roughly 9 cases plus one spares box.
Request a price for the P8 Stadium Perimeter LED Display
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Stadium Perimeter LED Display range, and you can compare p10 stadium perimeter led display, stadium led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.



WeChat