Product Detail
This P10 Stadium Perimeter LED Display pairs a 960×960 mm cabinet with 18 modules and 96×96 pixel resolution per panel. At P10 it is readable from 15 m, puts out 6,500 cd/m², and carries a 3-year warranty on modules, power supplies and receiving cards.


P10 Stadium Perimeter LED Display: key features
- IP65 sealed cabinet with pressure valve – the breathable valve equalises pressure so gaskets are not stressed.
- 6,500 cd/m² with automatic brightness control – daylight legible at 30 m, dimmed at night to stay inside local light rules.
- 18 modules per cabinet, 320×160 mm each – module size is standard, so replacements are never a custom order.
- Front-service magnetic modules – maintenance does not need scaffold access behind the screen.
P10 Stadium Perimeter LED Display technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P10 (10 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 96×96 px (9,216) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP65 |
| LED lamp | Nationstar |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 31.3 kg (34 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 15 m minimum, 30 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P10 Stadium Perimeter LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this P10 Stadium Perimeter LED Display, start from whole cabinets: a 4×3 build gives a 3.84×2.88 m screen, 384×288 pixels (0.11 MP), about 346 kg of cabinet and an average load near 3,100 W. Add one row and the same cabinet family gives 3.84 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
New structure design. It can meet the needs of rental, perimeter and fix installation. This multi-functional cabinets makes the new items easily and conveniently applied in different occasions. And this structure make the seam of cabinets connection much small. During hanging.
2, The mask is designed with high capacity of impact resistence. Buffering arc-surface ‘structure is applied for the mask shelter It can defuse the impact football, tennis ball and players.


Where the P10 Stadium Perimeter LED Display is used
- Race circuits – long runs of panels along the track with quick-lock frames.
- Training grounds and academies – smaller banner runs for sponsorship during practice sessions.
- Football and soccer stadiums – pitch-side advertising boards that stay readable for broadcast cameras.
- Multi-sport arenas – basketball, athletics and hockey venues that reuse one screen across seasons.
Installation and service access
The cabinets bolt onto a steel frame or a motorised goal-post system, and the top edge sits at roughly 900-1000 mm so players and officials are not obstructed. A front-service design keeps maintenance on the pitch side, which matters when the rear of the board faces a crowd barrier.
Protective soft-mask and anti-collision padding are recommended where players can slide into the board. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P10 Stadium Perimeter LED Display: frequently asked questions
Do you supply the steel structure and drawings?
Yes. We issue the cabinet layout, a steel-frame drawing, wind-load notes and the power distribution plan, so a local fabricator can build the structure to our dimensions.
How is the P10 Stadium Perimeter LED Display shipped, and what spare parts come with it?
Plywood case or flight case, sea or air freight, with a 2-3% spare module and power-supply allowance in the carton. Every order carries a serial list so a spare can be matched to the cabinet it came from.
Is the P10 Stadium Perimeter LED Display CE and RoHS certified?
Yes, with CE, RoHS and FCC reports issued against the actual BOM. Certificates are sent with the PI so your customs broker has them before the container arrives.
What brightness do I need for this P10 Stadium Perimeter LED Display?
6,500 cd/m² is the factory setting, which suits most sites. Rule of thumb: shadowed facade 1,500, open plaza 5,000, direct afternoon sun 6,500+. Running higher than the site needs shortens LED life.
Request a price for the P10 Stadium Perimeter LED Display
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Stadium Perimeter LED Display range, and you can compare stadium led screen, p8 stadium perimeter led display. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







