| Resolution/mm: |
6mm |
Pixel Configuration: |
1R1G1B |
| Scanning Mode: |
1/8 Scanning |
Module Size: |
192×192 |
| Cabinet Size: |
960x768mm/576x576mm |
Certificates: |
CE RoHS FCC CCC UL |
| Application: |
Stadium,airport,shopping Mall,street Advertising,stage Background |
Material: |
Aluminum |
| Warranty: |
3-5 Years |
| High Light: |
advertising led display board, advertising led billboard |
High Brightness smd 3535 Outdoor P6 LED Display for Advertisement
What is difference between SMD and DIP led display?
Surface Mounted Device LED is short for SMD,through the SMT technology encapsulating diode, soldering this lamp on the PCB board surface. Widely used for indoor projects.
Dual in-line Package is short for DIP, after soldering the LED lamp’s feet to stable it on the PCB., so it names of DIP LED. Mainly used for outdoor projects.
The comparison of SMD and DIP. SMD with RGB 3 colors in 1 LED cup technology, with better colors uniformity, and wider viewing angle, usually, SMD can be done the small pitch pixels,
so for some high resolution LED screen, SMD is the best choice.
DIP technology with LED foot in PCB board, then the heat dissipation is better than SMD, and higher brightness, even under the sunshine, DIP LED screen can also show the contents well.
That is the reason why people like DIP for outdoor used.
For the energy saving influence, SMD is a new technology, it is high luminous efficiency and good heat dissipation,SMD is 30% energy saving more than DIP.
Previously,SMD is only used for indoor LED screen, but with technological breakthroughs in recent years, SMD brightness has been greatly improved,
waterproof processing also be completely resolved, therefore, SMD is more and more applied to the outdoor LED display in market.
Specifications :
| outdoor SMD P6 |
| Resolution/mm |
6 |
| Pixel configuration |
1R1G1B |
| Pixel density/pixels/m² |
43222/m² |
| Module resolution |
27778 |
| Module size/mm |
192x192mm |
| View distance |
14-300m |
| Single point brightness adjust |
Can be added |
| Single point color adjust |
Can be added |
| White balance brightness |
>7500cd/㎡ |
| Color temperature |
6500K-9500K |
| Horizontal view angle |
120(degrees) |
| Vertical view angle |
60(degrees) |
| Signal Process bit |
10 or 16bit |
| Grey process |
1024x1024x1024 16834x16834x16834 65536x65536x65536 |
| Control distances |
Internet cable:100m, multimembrane:500m, monofilm:2km |
| Driving mode |
Constant driving current |
| Scanning mode |
1/13 SCANNING |
| Frame rate |
60Hz |
| Refresh frequency |
>3000Hz |
| Control mode |
Computer synchronous |
| Brightness adjusted range |
Manual, automatic operation, stepless continuous adjusted |
| 255 steps. No grey loss |
| Out of control point |
<1/10000 |
| Working hours |
≥72hours |
| Mean Time Between Failure |
>5000hours |
| Life time |
100000hours |
| Life-all-white(brightness halving) |
50000hours |
| Environment temperature range |
Operating temperature range: -20-45℃ |
| Self-check technology |
LED spot self-check, communications check, power check, |
| temperature monitor(need customization) |
| Remote monitoring |
Remote supervision and control, record potential fault, |
| send out warning signs to the operators.(need customization) |
| Software environment |
WindowsNT,Windows1999,WindowsXP |
| Luminous point width between centres |
Deviation<3% |
| Brightness uniformity |
<10% |
| Color uniformity(chromaticity coordinate) |
±0.003 |
| Power supply request |
AC85-264V(50Hz-60Hz) |
| Contrast |
(1000:1) |
| System protection |
Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration |
| Humidity(working) |
working:10-95% |
| Humidity(storing) |
storing:10-95% |
Technical service:
(1) System and product training in the pre construction, in order to have a thorough understanding of products;
(2) Provide installation training, be able to achieve the system installation and maintenance;
(3) After the project will be application training, make users grasp the use of the systematic hardware skillfully ;
(4) Users change , free training for new staff;
(5) We are responsible for the training of your staff’s use;
Spare parts warranty period Configuration Guidelines
(1) Adequacy: With the specific equipment, spare parts allocation adequate, ensure replacement in the first time of equipment failure;
(2) Necessity: On the basis of previous maintenance experience, we configure the spare parts are the key parts of the equipment, so as to ensure the economic allocation;
(3) Economic practicality: In order to deal with the fault in the shortest time, we configure the spare parts are complete module or unit, through our training, the owners can easily replace the spare parts, so as to ensure the normal operation of the system.
♦ Why choose us
Continues Quality
With more than 21 years experience in led display producing,equipments are updated regularly.What’s
more,unique standardized and module production ensure our products continuous quality.
Competitive Price
With large scale production capacity and professional production technology,our company have built
effective modular production.We always stick to promote the technical innovation and reduce cost to
benefit customers.
Fast Delivery
Once we promise the delivery date,we will try our best to fulfill it.Special procedures such as emergency
inventory will be used to maintain your uninterrupted supply of the products.
Perfect Service
Pre-sales:Your purchasing requirements will be highly valued and we’ll recommend suitable products to
you.
After-sales:We will track the products usage and then constantly perfect our products.
♦ Frequently Asked Questions
What kind of payment terms you can accept ?
We can accept T/T and Western Union.
What about your Led Display quality ?
Checking in the whole manufacturing process&100% inspection before shipment ensure the quality of
our products continuity.
What is your delivery time ?
Within 7-35 days according to your area and quantity.
Is your LED display competitive ?
Yes,we are led display manufacturer for more than 10 years.Mass and professional production ensure
our led display’s competitiveness.
Welcome to visit our website and inquire us more info,waiting for you all the time!!!
Contact Person: HERO
Business Developer.
Email : [email protected]
Skype: [email protected]
Wechat & Whatsapp & Mobile : +86 18923432534
Linkedin : :https://www.linkedin.com/feed/
FaceBook :https://www.facebook.com/profile.php?id=100066426288768
Shenzhen Vios Electronic Technoloy Co., Ltd
“customer first, integrity first, innovation, and strive for perfection”
Add : Room C411 Floor 4, C Building, Sijixingcheng, Zhenming Road No.161, Gongming Town, Guangming new district, Shenzhen City, China
Tel:+86-0755-86902546
