Product Detail
The Outdoor SMD LED Screen is a factory-direct outdoor LED display with a 960×960 mm cabinet that weighs about 30.4 kg and draws roughly 273 W/m² on average. Screen resolution works out at 200×200 per cabinet, so one panel already covers 40,000 pixels of facade media and entrance signage.


Outdoor SMD LED Screen: key features
- Factory calibration before packing – each cabinet carries its own calibration file for field re-tuning.
- 40,000 pixels per cabinet (P4.81, 960×960 mm) – a 4×3 wall lands at 800×600 (0.48 MP) without any custom cutting.
- NovaStar and ColorLight compatible control – sending cards, processors and cloud players can be sourced locally.
- IP65 sealed cabinet with pressure valve – the breathable valve equalises pressure so gaskets are not stressed.
Outdoor SMD LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P4.81 (4.81 mm) |
| Module size | 250×250 mm |
| Module count | 15 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 200×200 px (40,000) |
| Brightness | 5,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/13 |
| Protection | IP65 |
| LED lamp | Kinglight |
| Cabinet material | steel cabinet |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 273 W/m² |
| Viewing distance | 7.2 m minimum, 14 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this Outdoor SMD LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this Outdoor SMD LED Screen is simple enough to check before you order: 960÷4.81 = 200 pixels across each cabinet and 960÷4.81 = 200 down, so six cabinets in a row resolve 1,200 pixels at 5.76 m wide. Viewing distance follows the pitch – 7.2 m before the pixel structure disappears, 14 m before body copy reads cleanly. Because the cabinet divides into 15 standard 250×250 mm modules, a replacement module is never a custom order.
Product details
we have many different project for our oversea market. And the P8 is very high defintion.If you have any question or confusion, just feel free to contact us.We will give you all kinds of assistance and supports.
For post-sale service. We can instruct you how to use, adjust the screens, and change the boken modules with spare parts. For asynchronous control We use Onbon, or Xixun control system.


Where the Outdoor SMD LED Screen is used
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
Outdoor SMD LED Screen: frequently asked questions
Is the Outdoor SMD LED Screen CE and RoHS certified?
Yes, with CE, RoHS and FCC reports issued against the actual BOM. Certificates are sent with the PI so your customs broker has them before the container arrives.
What brightness do I need for this Outdoor SMD LED Screen?
This model is set to 5,000 cd/m². For a north-facing wall or an indoor position, 800-1,500 cd/m² is enough; direct sun needs 5,000 cd/m² and above. Keep 3x headroom over ambient light and let the auto-dimming sensor handle the rest.
What are the payment and MOQ terms?
One square metre minimum, 30% deposit and 70% against the B/L copy. A single 960×960 mm cabinet can be bought as a sample at cost plus freight if you want to test it before committing.
Which control system does the Outdoor SMD LED Screen use?
NovaStar or ColorLight, both supplied or BYO. The screen accepts HDMI, DVI and SDI input through a video processor, and content can be scheduled per zone or per time slot.
Request a price for the Outdoor SMD LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Fixed LED Display range, and you can compare p1.25 indoor led display module, p2.5 rgb led display. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







