Product Detail
This P2.5 RGB LED Display pairs a 640×480 mm cabinet with 6 modules and 256×192 pixel resolution per panel. At P2.5 it is readable from 3.8 m, puts out 1,000 cd/m², and carries a 3-year warranty on modules, power supplies and receiving cards.


P2.5 RGB LED Display: key features
- Front-service magnetic modules – a dead module is swapped from the front in minutes, no cabinet removal.
- 1920-3840 Hz refresh rate – no scan lines when a phone or broadcast camera pans across the screen.
- About 8.6 kg per cabinet, 245 W/m² average draw – a 2.56×1.44 m wall weighs roughly 32 kg and pulls 900 W.
- Kinglight LEDs on a die-cast aluminium cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
P2.5 RGB LED Display technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P2.5 (2.5 mm) |
| Module size | 320×160 mm |
| Module count | 6 per cabinet |
| Cabinet size | 640×480 mm |
| Resolution per cabinet | 256×192 px (49,152) |
| Brightness | 1,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP40 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 8.6 kg (28 kg/m²) |
| Average power | about 245 W/m² |
| Viewing distance | 3.8 m minimum, 8 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P2.5 RGB LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P2.5 RGB LED Display is simple enough to check before you order: 640÷2.5 = 256 pixels across each cabinet and 480÷2.5 = 192 down, so six cabinets in a row resolve 1,536 pixels at 3.84 m wide. Viewing distance follows the pitch – 3.8 m before the pixel structure disappears, 8 m before body copy reads cleanly. Because the cabinet divides into 6 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
P2.5 Indoor Soft Flexible LED Display Module is designed for the creative LED Screen applications. It is much flexible and can be fit any curved surface with magnetics on the module back side. such as the club, stage, studio, super market, shopping mall, stadium, concert, amusement park, sight-seeing area, real estate, airport etc.


Where the P2.5 RGB LED Display is used
- Building lobbies – permanent walls in reception areas.
- Retail flagship stores – brand walls behind the counter.
- Factories and plants – production dashboards in view of the floor.
- Education campuses – auditoriums and notice screens.
Installation and service access
Fixed installations are designed once and then left running, so we focus on cable management and thermal design: the rear cavity gets a minimum 200 mm service gap or a front-service cabinet where space is tight.
A scheduled cleaning and calibration visit every 12 months keeps colour and brightness uniform. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P2.5 RGB LED Display: frequently asked questions
Can you build this P2.5 RGB LED Display in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
Do you supply the steel structure and drawings?
Structure drawings and load calculations are included with the order; the steel itself is usually fabricated locally to save freight. We review the workshop drawing before it is cut.
How is the P2.5 RGB LED Display shipped, and what spare parts come with it?
Plywood case or flight case, sea or air freight, with a 2-3% spare module and power-supply allowance in the carton. Every order carries a serial list so a spare can be matched to the cabinet it came from.
Is the P2.5 RGB LED Display CE and RoHS certified?
CE, RoHS and FCC reports are issued against the BOM of this P2.5 cabinet, together with IEC 60068 climate and vibration reports. Certificates travel with the shipping documents.
Request a price for the P2.5 RGB LED Display
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Fixed LED Display range, and you can compare outdoor smd led screen, p5 outdoor led video wall. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







