High Definition Easy Installation Indoor P1.25 P1.53 P1.86 P2.5 P3 Fixed Advertising Pantallashd 4k Full Color Led Display Screen

Product description

Resolution/mm: 2.5 Pixel Configuration: 1R1G1B
Scanning Mode: 1/16 Scanning Module Size: 160x160mm/320mmx160mm
Cabinet Size: 480x480mm Certificates: CE RoHS FCC CCC UL
Material: Aluminum/iron Warranty: 3-5 Years
IC: MB5124/MB5024 Application: Stadium,airport,shopping Mall,street Advertising
High Light: led full color screen, indoor led display screen

 

Small pixel pitch LED billboard,easy connection P2.5 led display screen

 

 

Features:

 

1) High refresh rate , high brightness and high contrast which make the screen without any delay and smear phenomenon under directly sunlight.

2)Energy saving:low electric current,high-bright lamps,equipped with PFC switching power supply that save 30% electricty.

3)The brightness can be adjustable to meet the need of changing environment

4)Wide viewing angle: The horizontal and vertical viewing angles are so wide that it is suitable for wide horizontal

5)Environment protection, antistatic, dust-proof, good heat dissipation, cost-effective .

 

6)Error detection and monitoring:it can monitor the inner temperature,voltage,cooling fans etc and error detection automatically.

7) High reliability: using distributed scanning technology and module design technology that make higher reliability and stability.

8) Steady and reliable system:with strong anti-interference ability and long service life that can continually work for over 24 hours, and it’s easy to operate the system.

9) Favorable effect: using dot to dot calibration technology makes the image clearer and the layering stronger

10) Convenient installation and maintenance of display modules

 

 

Specifications :

 

outdoor DIP P2.5
Resolution/mm 2.5
Pixel configuration 1R1G1B
Pixel density/pixels/m² 160000/m²
Module resolution 64×64
Module size/mm 160x160mm
View distance 14-300m
Single point brightness adjust Can be added
Single point color adjust Can be added
White balance brightness >7500cd/㎡
Color temperature 6500K-9500K
Horizontal view angle 120(degrees)
Vertical view angle 60(degrees)
Signal Process bit 10 or 16bit
Grey process 1024x1024x1024 16834x16834x16834 65536x65536x65536
Control distances Internet cable:100m, multimembrane:500m, monofilm:2km
Driving mode Constant driving current
Scanning mode 1/30 SCANNING
Frame rate 60Hz
Refresh frequency >3000Hz
Control mode Computer synchronous
Brightness adjusted range Manual, automatic operation, stepless continuous adjusted
255 steps. No grey loss
Out of control point <1/10000
Working hours ≥72hours
Mean Time Between Failure >5000hours
Life time 100000hours
Life-all-white(brightness halving) 50000hours
Environment temperature range Operating temperature range: -20-45℃
Self-check technology LED spot self-check, communications check, power check,
temperature monitor(need customization)
Remote monitoring Remote supervision and control, record potential fault,
send out warning signs to the operators.(need customization)
Software environment WindowsNT,Windows1999,WindowsXP
Luminous point width between centres Deviation<3%
Brightness uniformity <10%
Color uniformity(chromaticity coordinate) ±0.003
Power supply request AC85-264V(50Hz-60Hz)
Contrast (1000:1)
System protection Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration
Humidity(working) working:10-95%
Humidity(storing) storing:10-95%

 

 

 

Important Knowledge of Led display


1. What is LED?
LED is sanded for Light Emitting Diode, a kind of semiconductor which is used to give and receive the electronic signal into infrared rays or light, using the characteristics of compound semiconductor. This is used for household appliances, remote controller, electric bulletin board, various kinds of automation appliances.
2. What are Pixel Pitch, Pixel Density, LED QTY, and Pixel Configuration?
Pixel Pitch is the distance between neighboring pixels.
Pixel Density is the quantity of pixels per square meter.
LED QTY is the quantity of LED lamps per square.
Pixel Configuration is the description of the consistence of a pixel, for instance, we use 1 red lamp, 1 green lamp, and 1 blue lamp to compose a pixel, the pixel configuration is 1R1G1B.
3. What are LED Type, Module size and Module resolution?
LED Type is the description of LED lamp, for instance, the brand, the shape in physical, the size of the lamp, etc.
Module size is the measurement of a module.
Module resolution is the number of pixels per module.
4. What is Drive Method, driving IC and Power supply
Drive Method: always we use static, 1/4 scan, 1/8 scan, 1/16 scan, the latter one contributes to less brightness than the former. We always use the static outdoor, and use the different kinds of scan indoor.
Driving IC is the generic term for several kinds of IC, that are used to control the LED lamps, and as a bridge between the control system and lamps.
Power supply: a kind of device that used as a transfer from 220V AC into 5V DC. It always seems like a box in the cabinet.
5. What is viewing angle?
Viewing angle is the maximum angle at which a display can be viewed with acceptable visual performance. It includes horizontal viewing angle and vertical viewing angle.

 

 

20170915171905_66359

 

 

 

Package and Delivery:

20200629092243_15956

20200629092225_85512

 

FAQ:

Q1: What’s the warranty of your LED Display Screen ?A1: We have a 3-year warranty for our led display screen, and 100,000 hours life span of the led lamps.
Q2: What about your pre-sale service and post-sale service?A2: For pre-sale service: We have a professional sales team and 13 years technical team who are willing to answer your question 24/7. We can offer a whole complete solution for your project!
For post-sale service: We can instruct you how to use, adjust the screens, and change the broken modules with spare parts.
Also, we can send technicians to your country to solve problems. Mostly, our led display will not have big problems within warranty time!
Q3: Whats your payment term? How long it takes to delivery?A3: We accept T/T and L/C, For both T/T and L/C, At least 30% deposit in advance, and the rest 70% before delivery.
Our average Production time is 16 days, after receiving the deposit.
Q4: What’s the control system?A4: For synchronization control: We use Nova, Linsn Or Colorlight control system.
For asynchronous control: We use ONBON or XIXUN control system.
Q5: How can you ensure the led display product quality?A5: Our led display screen quality is our core competence, for 8 years, what we rely on.
We have each standard process to make quality products.
If any quality failures within warranty time, we will refund you .

 

Welcome to visit our website and inquire us more info,waiting for you all the time!!!

 

Contact Person: HERO
Business Developer.
Email : [email protected]
Skype: [email protected]
Wechat & Whatsapp & Mobile : +86 18923432534
Linkedin : :https://www.linkedin.com/feed/
FaceBook :https://www.facebook.com/profile.php?id=100066426288768
Shenzhen Vios Electronic Technoloy Co., Ltd
“customer first, integrity first, innovation, and strive for perfection”
Add : Room C411 Floor 4, C Building, Sijixingcheng, Zhenming Road No.161, Gongming Town, Guangming new district, Shenzhen City, China
Tel:+86-0755-86902546

Related Products

High Definition Easy Installation Indoor P1.25 P1.53 P1.86 P2.5 P3 Fixed Advertising Pantallashd 4k Full Color Led Display Screen