Product Detail
Leyarled builds this Indoor SMD LED Screen in Shenzhen on a 640×480 mm die-casting aluminum cabinet: P2.5 Kinglight LEDs, 49,152 pixels per panel, 600 cd/m² and IP20. It is the configuration most indoor commercial buyers settle on when they need reception walls, retail and wayfinding to run daily without a local engineer.


Indoor SMD LED Screen: key features
- 600 cd/m² with automatic brightness control – the sensor trims output after dusk instead of running flat out.
- 6 modules per cabinet, 320×160 mm each – spares are interchangeable across the whole cabinet family.
- Front-service magnetic modules – maintenance does not need scaffold access behind the screen.
- 1920-3840 Hz refresh rate – keeps colour stable on camera, which matters for televised advertising.
Indoor SMD LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P2.5 (2.5 mm) |
| Module size | 320×160 mm |
| Module count | 6 per cabinet |
| Cabinet size | 640×480 mm |
| Resolution per cabinet | 256×192 px (49,152) |
| Brightness | 600 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/16 |
| Protection | IP20 |
| LED lamp | Kinglight |
| Cabinet material | die-casting aluminum |
| Cabinet weight | about 7.4 kg (24 kg/m²) |
| Average power | about 217 W/m² |
| Viewing distance | 3.8 m minimum, 8 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this Indoor SMD LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this Indoor SMD LED Screen, start from whole cabinets: a 4×3 build gives a 2.56×1.44 m screen, 1024×576 pixels (0.59 MP), about 27 kg of cabinet and an average load near 800 W. Add one row and the same cabinet family gives 1.92 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
Adopt dual service of black kingkong series among core techniques, free back service path for all kinds of installation surroundings. Broadcast level color scale, color temperature and brightness adjustable intelligentizedly, smooth color, high color ratio, nature pictures.
Adopt top high brightness with low power consumption LED lamp,energy saving≥30%, if adopt 28 kinds of main patent technique, entire energy saving ≥50%, environment protection. Pioneer in outdoor mature HD LED Display, all advanced specifications 2 years earlier than others, successful cases around the world.


Where the Indoor SMD LED Screen is used
- Corporate offices – reception media walls and internal comms.
- Education – lecture theatres and campus wayfinding.
- Retail stores – promotional walls and window displays.
- Conference and hotel lobbies – welcome screens and event schedules.
Installation and service access
Indoor screens are typically wall-mounted on a bracket or recessed into a joinery frame. Because the viewing distance is short, we set brightness to 600-1200 nits and use a low-brightness calibration so the wall does not glare in a dim room.
A magnetic front-service module means the screen can sit flush against a finished wall. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
Indoor SMD LED Screen: frequently asked questions
How many spare modules should I keep?
2-3% of the total module count, minimum two. For this cabinet that means one spare per 40 cabinets, or a full spare cabinet for a wall under 20 m².
Can you build this Indoor SMD LED Screen in a custom size?
Any size built from 640×480 mm cabinets, plus half-cabinet trims where a wall cannot take a full module. You get a drawing with the pixel count and centre-to-centre dimensions to check against the building.
Do you supply the steel structure and drawings?
The drawing pack covers anchor spacing, a 27 kg load case for a 2.56×1.44 m wall and the wind pressure for your region. A local fabricator builds to it, and we check the shop drawing before cutting starts.
How is the Indoor SMD LED Screen shipped, and what spare parts come with it?
Plywood case or flight case, sea or air freight, with a 2-3% spare module and power-supply allowance in the carton. Every order carries a serial list so a spare can be matched to the cabinet it came from.
Request a price for the Indoor SMD LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Indoor Full Color LED Display range, and you can compare p3 indoor led display screen, p2.5 indoor rgb led display. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







