LEYARLED — Focus On LED Screen Field For More Than 10 Years.

IP43 Indoor P2.5 High Definition GOB Led Screen Full Color 2200CD/Sqm Brightness

IP43 Indoor P2.5 High Definition GOB Led Screen Full Color 2200CD/Sqm Brightness

Product Details:
Place of Origin: China
Brand Name: Vios
Certification: CE/ROHS/FCC/ISO/UL
Model Number: P2.5
Payment & Shipping Terms:
Minimum Order Quantity: 5 sqm
Packaging Details: flight case, wooden case, carton, it is up to you.
Delivery Time: 7-10 working days after receive your payment
Payment Terms: T/T
Supply Ability: http://www.scxled.cn/

Product Detail

The P2.5 Indoor GOB LED Display from Leyarled is a 640×480 mm GOB LED display for impact-resistant close-viewing walls, built around a P2.5 screen that resolves 49,152 pixels per cabinet. Cabinets are sealed to IP43, run 2,200 cd/m² with 1920-3840 Hz refresh, and ship with the layout drawing, control configuration and spare modules already matched to the order.

P2.5 Indoor GOB LED Display 640x480mm GOB LED display - Leyarled

P2.5 Indoor GOB LED Display: key features

  • 1920-3840 Hz refresh rate – keeps colour stable on camera, which matters for televised advertising.
  • About 8.3 kg per cabinet, 210 W/m² average draw – a 2.56×1.44 m wall weighs roughly 31 kg and pulls 800 W.
  • Kinglight LEDs on a die-cast aluminium cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
  • Factory calibration before packing – each cabinet carries its own calibration file for field re-tuning.

P2.5 Indoor GOB LED Display technical specification

Parameter Value
Pixel pitch P2.5 (2.5 mm)
Module size 320×160 mm
Module count 6 per cabinet
Cabinet size 640×480 mm
Resolution per cabinet 256×192 px (49,152)
Brightness 2,200 cd/m² (auto dimming)
Refresh rate 1920-3840 Hz
Scan mode constant current, high scan
Protection IP43
LED lamp Kinglight
Cabinet material die-cast aluminium
Cabinet weight about 8.3 kg (27 kg/m²)
Average power about 210 W/m²
Viewing distance 3.8 m minimum, 8 m comfortable
Lifespan 100,000 hours
Warranty 3 years

The table shows the standard build for this P2.5 Indoor GOB LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.

How the numbers work on a real wall

To size this P2.5 Indoor GOB LED Display, start from whole cabinets: a 4×3 build gives a 2.56×1.44 m screen, 1024×576 pixels (0.59 MP), about 31 kg of cabinet and an average load near 800 W. Add one row and the same cabinet family gives 1.92 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.

Product details

Large PCB board emerges heavy current,wide circuit and high brightness and avoids Mosaic phenomenon so that can make sure display work smoothly.

220V Langyu lightning rod installing(outdoor),the hight from lightning rod to the top of display is more than 2.5m,prevents lightning sudden attacking makes display can not work smoothly.And undergrounding construction:the lowest layer is putting copper rod about height 2m to 4m in the deepest,then charcoal 50mm to 100mm in the countdown second layer,and then salt in the countdown third layer to keep ground wet.

Where the P2.5 Indoor GOB LED Display is used

  • Museum and exhibition walls – near-field viewing with no visible module seams.
  • Retail and brand stores – close-viewing screens that resist knocks and dust.
  • Meeting and board rooms – fine-pitch walls for presentations and video calls.
  • Control rooms – 24/7 operation with a sealed, easy-clean surface.

Installation and service access

GOB modules are glued at the surface, so the panel front is sealed against dust and moisture. That makes the display suitable for public touch-height installation where conventional SMD modules would lose pixels to impact damage.

Front-service magnetic modules keep maintenance to a single module swap without removing the cabinet. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.

P2.5 Indoor GOB LED Display: frequently asked questions

How is the P2.5 Indoor GOB LED Display shipped, and what spare parts come with it?

Export packing is plywood with foam, and each case is labelled by cabinet position so installation follows the drawing. Spares: 2-3% modules, 1% power supplies, 1% receiving cards.

Is the P2.5 Indoor GOB LED Display CE and RoHS certified?

Yes, with CE, RoHS and FCC reports issued against the actual BOM. Certificates are sent with the PI so your customs broker has them before the container arrives.

What brightness do I need for this P2.5 Indoor GOB LED Display?

2,200 cd/m² is the factory setting, which suits most sites. Rule of thumb: shadowed facade 1,500, open plaza 5,000, direct afternoon sun 6,500+. Running higher than the site needs shortens LED life.

What are the payment and MOQ terms?

One square metre minimum, 30% deposit and 70% against the B/L copy. A single 640×480 mm cabinet can be bought as a sample at cost plus freight if you want to test it before committing.

Request a price for the P2.5 Indoor GOB LED Display

Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under GOB LED Display range, and you can compare p2.5 indoor flexible curtain led screen, p10 outdoor smd led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.

Get In Touch With Us

We are glad to work together with you and finally bring you the satisfied products.

  • Reply within 12 hours, 24/7 online service
  • Free solution design according to your project size
  • OEM & ODM accepted, logo printing on panel and package
  • 6-year warranty and lifetime technical support

sales@leyarled.com

Send Your Inquiry

We will reply to you within 12 working hours.

By using this form you agree with the storage and handling of your data by this website.

WeChat QR code WeChat +86 189 2343 2534 liujinmiao@wehchi.com WhatsApp: +86 189 2343 2534
P2.5 Indoor GOB LED Display product photo - photo 3 of 3
IP43 Indoor P2.5 High Definition GOB Led Screen Full Color 2200CD/Sqm Brightness