Product Detail
This Transparent LED Screen pairs a 1000×500 mm cabinet with 4 modules and 256×128 pixel resolution per panel. At P3.9 it is readable from 5.8 m, puts out 1,000 cd/m², and carries a 3-year warranty on modules, power supplies and receiving cards.


Transparent LED Screen: key features
- 4 modules per cabinet, 500×250 mm each – module size is standard, so replacements are never a custom order.
- Front-service magnetic modules – a dead module is swapped from the front in minutes, no cabinet removal.
- 1920-3840 Hz refresh rate – keeps colour stable on camera, which matters for televised advertising.
- About 6.5 kg per cabinet, 158 W/m² average draw – a 4.0×1.5 m wall weighs roughly 39 kg and pulls 900 W.
Transparent LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P3.9 (3.9 mm) |
| Module size | 500×250 mm |
| Module count | 4 per cabinet |
| Cabinet size | 1000×500 mm |
| Resolution per cabinet | 256×128 px (32,768) |
| Brightness | 1,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP40 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 6.5 kg (13 kg/m²) |
| Average power | about 158 W/m² |
| Viewing distance | 5.8 m minimum, 12 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this Transparent LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this Transparent LED Screen is simple enough to check before you order: 1000÷3.9 = 256 pixels across each cabinet and 500÷3.9 = 128 down, so six cabinets in a row resolve 1,536 pixels at 6.0 m wide. Viewing distance follows the pitch – 5.8 m before the pixel structure disappears, 12 m before body copy reads cleanly. Because the cabinet divides into 4 standard 500×250 mm modules, a replacement module is never a custom order.
Product details
Vios LED Soft transparent film self-adhesive LED display solutions which can simply be pasted onto any glass surface everywhere. It is made of soft see-through anti-UV PET and a special self-adhesive material imported from Japan, making it relatively easy to install and use. This super light & ultra-thin film LED display screen, which has a different appearance, combines seamlessly with the glass surface when the display is turned off, and blends the artistic and sense of technology perfectly.
The LED film screen is self-adhesive with high flexibility, it’s ultra-thin and light in weight. With a high grayscale of 16bit and a refresh rate of 3840hz, the dynamic display effect is vivid.


Where the Transparent LED Screen is used
- Bank and brand showrooms – product launches behind glass without blocking daylight.
- Airport and metro glazing – wayfinding and advertising on existing window surfaces.
- Stage and event sets – see-through backdrops for camera work.
- Retail glass facades – advertising that keeps the shop interior visible from the street.
Installation and service access
Transparent panels clamp onto the existing mullions or hang from a top rail, so no structural rebuild is needed. Cable routing runs along the frame and the sending card sits in a small enclosure behind the glass.
Transparency is roughly 55-75% depending on pitch, so check the sightline requirement before choosing p3.9 versus p7.8. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
Transparent LED Screen: frequently asked questions
Will this Transparent LED Screen survive a coastal or high-humidity site?
The cabinet is IP40 with a breathable pressure valve, and for coastal projects we add an anti-corrosion coating plus stainless fixings. Wash the front with a soft brush and deionised water every 6-12 months to keep salt off the mask.
What is the lead time for a Transparent LED Screen order?
Standard cabinets ship in 7-12 working days after the deposit clears; a full project with structure, control and commissioning takes 15-20 days. Custom cabinet sizes or curved frames add 3-5 days. We send a production photo set before the goods leave Shenzhen.
How many spare modules should I keep?
2-3% of the total module count, minimum two. For this cabinet that means one spare per 40 cabinets, or a full spare cabinet for a wall under 20 m².
Can you build this Transparent LED Screen in a custom size?
Any size built from 1000×500 mm cabinets, plus half-cabinet trims where a wall cannot take a full module. You get a drawing with the pixel count and centre-to-centre dimensions to check against the building.
Request a price for the Transparent LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Soft Crystal Film LED Screen range, and you can compare p7.5 transparent led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







