Product Detail
This P10.42 Transparent LED Screen pairs a 1000×500 mm cabinet with 4 modules and 96×48 pixel resolution per panel. At P10.42 it is readable from 15.6 m, puts out 1,000 cd/m², and carries a 3-year warranty on modules, power supplies and receiving cards.


P10.42 Transparent LED Screen: key features
- IP20 sealed cabinet with pressure valve – the breathable valve equalises pressure so gaskets are not stressed.
- 1,000 cd/m² with automatic brightness control – the sensor trims output after dusk instead of running flat out.
- 4 modules per cabinet, 500×250 mm each – spares are interchangeable across the whole cabinet family.
- Front-service magnetic modules – a dead module is swapped from the front in minutes, no cabinet removal.
P10.42 Transparent LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P10.42 (10.42 mm) |
| Module size | 500×250 mm |
| Module count | 4 per cabinet |
| Cabinet size | 1000×500 mm |
| Resolution per cabinet | 96×48 px (4,608) |
| Brightness | 1,000 cd/m² (auto dimming) |
| Refresh rate | 2000 Hz |
| Scan mode | constant current, high scan |
| Protection | IP20 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 6.5 kg (13 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 15.6 m minimum, 31 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P10.42 Transparent LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P10.42 Transparent LED Screen is simple enough to check before you order: 1000÷10.42 = 96 pixels across each cabinet and 500÷10.42 = 48 down, so six cabinets in a row resolve 576 pixels at 6.0 m wide. Viewing distance follows the pitch – 15.6 m before the pixel structure disappears, 31 m before body copy reads cleanly. Because the cabinet divides into 4 standard 500×250 mm modules, a replacement module is never a custom order.
Product details
Leeman glass display can directly stick to the inside part of the glass wall by special designed glue, and after 10 seconds curing, it will connect with the glass wall firmly. Thus decrease the installation difficulty and cost greatly.
With only 8mm width and 12kg/m2 weight, the installed glass display takes very little space and without any increase in the glass wall loading weight.


Where the P10.42 Transparent LED Screen is used
- Bank and brand showrooms – product launches behind glass without blocking daylight.
- Airport and metro glazing – wayfinding and advertising on existing window surfaces.
- Stage and event sets – see-through backdrops for camera work.
- Retail glass facades – advertising that keeps the shop interior visible from the street.
Installation and service access
Transparent panels clamp onto the existing mullions or hang from a top rail, so no structural rebuild is needed. Cable routing runs along the frame and the sending card sits in a small enclosure behind the glass.
Transparency is roughly 55-75% depending on pitch, so check the sightline requirement before choosing p3.9 versus p7.8. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P10.42 Transparent LED Screen: frequently asked questions
What are the payment and MOQ terms?
30/70 T/T is standard, LC at sight accepted, and sample orders of one cabinet are possible at a small premium so you can test the panel before a full wall.
Which control system does the P10.42 Transparent LED Screen use?
NovaStar or ColorLight, both supplied or BYO. The screen accepts HDMI, DVI and SDI input through a video processor, and content can be scheduled per zone or per time slot.
Can I see this LED display running before I order?
Yes. We send a video of the exact cabinet type under a white and a grey test pattern, plus a phone camera pan, so you can judge scan lines and uniformity before the deposit.
What does the 3-year warranty cover?
Modules, power supplies, receiving cards and the cabinet structure. Wear parts such as fan filters are excluded, and spare parts stay available in Shenzhen for five years after the order.
Request a price for the P10.42 Transparent LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Transparent LED Screen range, and you can compare p3.9 transparent led screen, p3.91 transparent led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.






