Product Detail
The Outdoor LED Display from Leyarled is a 960×960 mm outdoor LED display for facade media and entrance signage, built around a P3.076 screen that resolves 97,344 pixels per cabinet. Cabinets are sealed to IP31, run 6,500 cd/m² with 1920-3840 Hz refresh, and ship with the layout drawing, control configuration and spare modules already matched to the order.


Outdoor LED Display: key features
- Factory calibration before packing – each cabinet carries its own calibration file for field re-tuning.
- 97,344 pixels per cabinet (P3.076, 960×960 mm) – a 4×3 wall lands at 1248×936 (1.17 MP) without any custom cutting.
- NovaStar and ColorLight compatible control – the control path stays one card, one processor, one content source.
- IP31 sealed cabinet with pressure valve – the breathable valve equalises pressure so gaskets are not stressed.
Outdoor LED Display technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P3.076 (3.076 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 312×312 px (97,344) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP31 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminum |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 273 W/m² |
| Viewing distance | 4.6 m minimum, 9 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this Outdoor LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this Outdoor LED Display is simple enough to check before you order: 960÷3.076 = 312 pixels across each cabinet and 960÷3.076 = 312 down, so six cabinets in a row resolve 1,872 pixels at 5.76 m wide. Viewing distance follows the pitch – 4.6 m before the pixel structure disappears, 9 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
Buy cabinets of same batch: to avoid brightness&color difference on one single screen, you must buy cabinets of the same batch. That is, you must buy the cabinets for one single screen by one order from us.
Parts included: High-quality cabinets, LED modules, power supplies, NOVASTAR receiving card, power cables and signal cables. It does not include sending card. You can order the sending card by this link: NOVASTAR MSD300 sending card.


Where the Outdoor LED Display is used
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
Outdoor LED Display: frequently asked questions
Can you build this Outdoor LED Display in a custom size?
Any size built from 960×960 mm cabinets, plus half-cabinet trims where a wall cannot take a full module. You get a drawing with the pixel count and centre-to-centre dimensions to check against the building.
Do you supply the steel structure and drawings?
Yes. We issue the cabinet layout, a steel-frame drawing, wind-load notes and the power distribution plan, so a local fabricator can build the structure to our dimensions.
How is the Outdoor LED Display shipped, and what spare parts come with it?
Each 960×960 mm cabinet is crated on its edge in a plywood case with foam corners, and the carton list matches the cabinet numbers on the layout drawing. A 3.84×2.88 m wall ships in roughly 9 cases plus one spares box.
Is the Outdoor LED Display CE and RoHS certified?
CE and RoHS as standard, FCC on request, and IEC 60068 test reports for temperature, humidity and vibration on the cabinet.
Request a price for the Outdoor LED Display
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Indoor LED Panel 640×480 range, and you can compare p1.53 indoor led video wall, p2 indoor led display screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.









