Product Detail
Sized for sideline advertising and replay boards, this Stadium Perimeter LED Display uses Kinglight LEDs at P4 inside a 960×960 mm die-cast aluminium cabinet, sealed to IP65 and calibrated to 6,500 cd/m². Leyarled has shipped this cabinet family since 2013 with a 3-year warranty and a 2-3% spare-module allowance in each case.


Stadium Perimeter LED Display: key features
- Front-service magnetic modules – maintenance does not need scaffold access behind the screen.
- 1920-3840 Hz refresh rate – no scan lines when a phone or broadcast camera pans across the screen.
- About 31.3 kg per cabinet, 280 W/m² average draw – a 3.84×2.88 m wall weighs roughly 346 kg and pulls 3,100 W.
- Kinglight LEDs on a die-cast aluminium cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
Stadium Perimeter LED Display technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P4 (4 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 240×240 px (57,600) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP65 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 31.3 kg (34 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 6 m minimum, 12 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this Stadium Perimeter LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this Stadium Perimeter LED Display is simple enough to check before you order: 960÷4 = 240 pixels across each cabinet and 960÷4 = 240 down, so six cabinets in a row resolve 1,440 pixels at 5.76 m wide. Viewing distance follows the pitch – 6 m before the pixel structure disappears, 12 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
2, The mask is designed with high capacity of impact resistence. Buffering arc-surface ‘structure is applied for the mask shelter It can defuse the impact football, tennis ball and players.
The display with two unique, rugged stands can be adjusted different angles showing a perfect image to live audiences and broadcast cameras.


Where the Stadium Perimeter LED Display is used
- Multi-sport arenas – basketball, athletics and hockey venues that reuse one screen across seasons.
- Race circuits – long runs of panels along the track with quick-lock frames.
- Training grounds and academies – smaller banner runs for sponsorship during practice sessions.
- Football and soccer stadiums – pitch-side advertising boards that stay readable for broadcast cameras.
Installation and service access
The cabinets bolt onto a steel frame or a motorised goal-post system, and the top edge sits at roughly 900-1000 mm so players and officials are not obstructed. A front-service design keeps maintenance on the pitch side, which matters when the rear of the board faces a crowd barrier.
Protective soft-mask and anti-collision padding are recommended where players can slide into the board. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
Stadium Perimeter LED Display: frequently asked questions
Do you supply the steel structure and drawings?
Structure drawings and load calculations are included with the order; the steel itself is usually fabricated locally to save freight. We review the workshop drawing before it is cut.
How is the Stadium Perimeter LED Display shipped, and what spare parts come with it?
Export packing is plywood with foam, and each case is labelled by cabinet position so installation follows the drawing. Spares: 2-3% modules, 1% power supplies, 1% receiving cards.
Is the Stadium Perimeter LED Display CE and RoHS certified?
CE and RoHS as standard, FCC on request, and IEC 60068 test reports for temperature, humidity and vibration on the cabinet.
What brightness do I need for this Stadium Perimeter LED Display?
This model is set to 6,500 cd/m². For a north-facing wall or an indoor position, 800-1,500 cd/m² is enough; direct sun needs 5,000 cd/m² and above. Keep 3x headroom over ambient light and let the auto-dimming sensor handle the rest.
Request a price for the Stadium Perimeter LED Display
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Stadium Perimeter LED Display range, and you can compare p10 stadium perimeter led display, p6 stadium perimeter led display. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.








