Product Detail
The P16 Outdoor LED Display Screen is a factory-direct outdoor LED display with a 960×960 mm cabinet that weighs about 30.4 kg and draws roughly 280 W/m² on average. Screen resolution works out at 60×60 per cabinet, so one panel already covers 3,600 pixels of facade media and entrance signage.


P16 Outdoor LED Display Screen: key features
- About 30.4 kg per cabinet, 280 W/m² average draw – power and structure can be sized from these two numbers before the layout is final.
- Epistar LEDs on a die-cast aluminium cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
- Factory calibration before packing – brightness and colour bins are matched across cabinets so a 40 m² wall reads as one surface.
- 3,600 pixels per cabinet (P16, 960×960 mm) – a 4×3 wall lands at 240×180 (0.04 MP) without any custom cutting.
P16 Outdoor LED Display Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P16 (16 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 60×60 px (3,600) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP54 |
| LED lamp | Epistar |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 24 m minimum, 48 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P16 Outdoor LED Display Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P16 Outdoor LED Display Screen is simple enough to check before you order: 960÷16 = 60 pixels across each cabinet and 960÷16 = 60 down, so six cabinets in a row resolve 360 pixels at 5.76 m wide. Viewing distance follows the pitch – 24 m before the pixel structure disappears, 48 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
(3) Can be connected with PC and the web net and show the content, and also can be controlled remotely via VPM+ADSL. (One-Sever-AnyClients supported)
(2) Show all kinds of word, text, graph, picture, video, 2-dimention, 3-dimention cartoon and other information with your PC does synchronously.
![]()
![]()
Where the P16 Outdoor LED Display Screen is used
- Building facades – permanent media walls on commercial buildings.
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
- Sport and event venues – score and sponsor boards.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P16 Outdoor LED Display Screen: frequently asked questions
Is the P16 Outdoor LED Display Screen CE and RoHS certified?
CE, RoHS and FCC reports are issued against the BOM of this P16 cabinet, together with IEC 60068 climate and vibration reports. Certificates travel with the shipping documents.
What brightness do I need for this P16 Outdoor LED Display Screen?
6,500 cd/m² is the factory setting, which suits most sites. Rule of thumb: shadowed facade 1,500, open plaza 5,000, direct afternoon sun 6,500+. Running higher than the site needs shortens LED life.
What are the payment and MOQ terms?
30/70 T/T is standard, LC at sight accepted, and sample orders of one cabinet are possible at a small premium so you can test the panel before a full wall.
Which control system does the P16 Outdoor LED Display Screen use?
Standard is a NovaStar sending card with a ColorLight alternative on request. Input is HDMI/DVI, and cloud publishing is available if you want to update several screens from one dashboard.
Request a price for the P16 Outdoor LED Display Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Outdoor Full Color LED Display range, and you can compare p10 outdoor smd led screen, p10 outdoor led display screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.






