Product Detail
Sized for reception walls, retail and wayfinding, this P2.5 Indoor SMD LED Screen uses Kinglight LEDs at P2.5 inside a 640×480 mm die-casting aluminum cabinet, sealed to IP30 and calibrated to 1,000 cd/m². Leyarled has shipped this cabinet family since 2013 with a 3-year warranty and a 2-3% spare-module allowance in each case.


P2.5 Indoor SMD LED Screen: key features
- IP30 sealed cabinet with pressure valve – rain, dust and pressure swings do not pull moisture into the module cavity.
- 1,000 cd/m² with automatic brightness control – daylight legible at 8 m, dimmed at night to stay inside local light rules.
- 6 modules per cabinet, 320×160 mm each – module size is standard, so replacements are never a custom order.
- Front-service magnetic modules – a dead module is swapped from the front in minutes, no cabinet removal.
P2.5 Indoor SMD LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P2.5 (2.5 mm) |
| Module size | 320×160 mm |
| Module count | 6 per cabinet |
| Cabinet size | 640×480 mm |
| Resolution per cabinet | 256×192 px (49,152) |
| Brightness | 1,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP30 |
| LED lamp | Kinglight |
| Cabinet material | die-casting aluminum |
| Cabinet weight | about 7.4 kg (24 kg/m²) |
| Average power | about 217 W/m² |
| Viewing distance | 3.8 m minimum, 8 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P2.5 Indoor SMD LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this P2.5 Indoor SMD LED Screen, start from whole cabinets: a 4×3 build gives a 2.56×1.44 m screen, 1024×576 pixels (0.59 MP), about 27 kg of cabinet and an average load near 800 W. Add one row and the same cabinet family gives 1.92 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
, UK, France,Germany, Netherlands, Norway,Belgium, Italy, Malta, Monaco, Poland,Russia, Spain,Sweden, Switzerland,Ukraine,Romania, South Africa, Kenya, India, Malaysia, Saudi Arabic, Austraila, Japan, Korea etc more than 50 countries.
Where the P2.5 Indoor SMD LED Screen is used
- Corporate offices – reception media walls and internal comms.
- Education – lecture theatres and campus wayfinding.
- Retail stores – promotional walls and window displays.
- Conference and hotel lobbies – welcome screens and event schedules.
Installation and service access
Indoor screens are typically wall-mounted on a bracket or recessed into a joinery frame. Because the viewing distance is short, we set brightness to 600-1200 nits and use a low-brightness calibration so the wall does not glare in a dim room.
A magnetic front-service module means the screen can sit flush against a finished wall. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P2.5 Indoor SMD LED Screen: frequently asked questions
What does the 3-year warranty cover?
LED modules, drivers, receiving cards and cabinet hardware, with free replacement of failed units in the first 3 years and chargeable spares held for five.
Can you put our brand on the P2.5 Indoor SMD LED Screen?
OEM is available from 20 m²: cabinet badge, carton print and manual, plus a firmware splash screen if you want the wall to show your brand at boot.
Will this P2.5 Indoor SMD LED Screen survive a coastal or high-humidity site?
The cabinet is IP30 with a breathable pressure valve, and for coastal projects we add an anti-corrosion coating plus stainless fixings. Wash the front with a soft brush and deionised water every 6-12 months to keep salt off the mask.
What is the lead time for a P2.5 Indoor SMD LED Screen order?
Standard cabinets ship in 7-12 working days after the deposit clears; a full project with structure, control and commissioning takes 15-20 days. Custom cabinet sizes or curved frames add 3-5 days. We send a production photo set before the goods leave Shenzhen.
Request a price for the P2.5 Indoor SMD LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Advertising LED Screens range, and you can compare p16 outdoor rental led screen, p10 outdoor led display screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







