Product Detail
Sized for facade media and entrance signage, this P6 Outdoor LED Cabinet uses Kinglight LEDs at P6 inside a 960×960 mm steel cabinet cabinet, sealed to IP65 and calibrated to 6,500 cd/m². Leyarled has shipped this cabinet family since 2013 with a 3-year warranty and a 2-3% spare-module allowance in each case.


P6 Outdoor LED Cabinet: key features
- 25,600 pixels per cabinet (P6, 960×960 mm) – a 4×3 wall lands at 640×480 (0.31 MP) without any custom cutting.
- NovaStar and ColorLight compatible control – the control path stays one card, one processor, one content source.
- IP65 sealed cabinet with pressure valve – rain, dust and pressure swings do not pull moisture into the module cavity.
- 6,500 cd/m² with automatic brightness control – the sensor trims output after dusk instead of running flat out.
P6 Outdoor LED Cabinet technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P6 (6 mm) |
| Module size | 192×192 mm |
| Module count | 25 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 160×160 px (25,600) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/8 |
| Protection | IP65 |
| LED lamp | Kinglight |
| Cabinet material | steel cabinet |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 273 W/m² |
| Viewing distance | 9 m minimum, 18 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P6 Outdoor LED Cabinet. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this P6 Outdoor LED Cabinet, start from whole cabinets: a 4×3 build gives a 3.84×2.88 m screen, 640×480 pixels (0.31 MP), about 336 kg of cabinet and an average load near 3,000 W. Add one row and the same cabinet family gives 3.84 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
Fully equipped with professional team and modern facilities to manufacture fine LED display products, make products that have found wide application in airports, stations,ports,gymnasiums, banks, schools, churches,etc.our LED products are deployed across 100 countries all over world,covering Asia, Middle East, America, Europe and Africa.
From stadium to TV station, to conference & events, Vios provides a wide range of eye-catching and energy efficient LED screen solutions to industrial, commercial and governmental markets worldwide. The detailed parameter as follows.
Where the P6 Outdoor LED Cabinet is used
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P6 Outdoor LED Cabinet: frequently asked questions
What brightness do I need for this P6 Outdoor LED Cabinet?
6,500 cd/m² is the factory setting, which suits most sites. Rule of thumb: shadowed facade 1,500, open plaza 5,000, direct afternoon sun 6,500+. Running higher than the site needs shortens LED life.
What are the payment and MOQ terms?
30/70 T/T is standard, LC at sight accepted, and sample orders of one cabinet are possible at a small premium so you can test the panel before a full wall.
Which control system does the P6 Outdoor LED Cabinet use?
Standard is a NovaStar sending card with a ColorLight alternative on request. Input is HDMI/DVI, and cloud publishing is available if you want to update several screens from one dashboard.
Can I see this LED display running before I order?
Yes. We send a video of the exact cabinet type under a white and a grey test pattern, plus a phone camera pan, so you can judge scan lines and uniformity before the deposit.
Request a price for the P6 Outdoor LED Cabinet
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Hanging LED Display range, and you can compare p1.56 hanging led screen, p4 indoor hanging led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.








