Product Detail
Sized for facade media and entrance signage, this Outdoor LED Display Screen uses Kinglight LEDs at P5 inside a 500×1000 mm die-cast aluminium cabinet, sealed to IP65 and calibrated to 6,500 cd/m². Leyarled has shipped this cabinet family since 2013 with a 3-year warranty and a 2-3% spare-module allowance in each case.
Outdoor LED Display Screen: key features
- IP65 sealed cabinet with pressure valve – rain, dust and pressure swings do not pull moisture into the module cavity.
- 6,500 cd/m² with automatic brightness control – daylight legible at 15 m, dimmed at night to stay inside local light rules.
- 8 modules per cabinet, 250×250 mm each – module size is standard, so replacements are never a custom order.
- Front-service magnetic modules – maintenance does not need scaffold access behind the screen.
Outdoor LED Display Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P5 (5 mm) |
| Module size | 250×250 mm |
| Module count | 8 per cabinet |
| Cabinet size | 500×1000 mm |
| Resolution per cabinet | 100×200 px (20,000) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/7 |
| Protection | IP65 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 16.5 kg (33 kg/m²) |
| Average power | about 273 W/m² |
| Viewing distance | 7.5 m minimum, 15 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this Outdoor LED Display Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this Outdoor LED Display Screen is simple enough to check before you order: 500÷5 = 100 pixels across each cabinet and 1000÷5 = 200 down, so six cabinets in a row resolve 600 pixels at 3.0 m wide. Viewing distance follows the pitch – 7.5 m before the pixel structure disappears, 15 m before body copy reads cleanly. Because the cabinet divides into 8 standard 250×250 mm modules, a replacement module is never a custom order.
Product details
From raw materials to finished product, from design to produce, we control all steps, which are the guarantee of the quality and reliability.
For our bosses have been in the key positions at the top LED display factory since 2004, we have very close and strategic relationship with the raw material providers, which support the stable quality of our products.
Where the Outdoor LED Display Screen is used
- Building facades – permanent media walls on commercial buildings.
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
- Sport and event venues – score and sponsor boards.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
Outdoor LED Display Screen: frequently asked questions
Which control system does the Outdoor LED Display Screen use?
NovaStar or ColorLight, both supplied or BYO. The screen accepts HDMI, DVI and SDI input through a video processor, and content can be scheduled per zone or per time slot.
Can I see this LED display running before I order?
Yes. We send a video of the exact cabinet type under a white and a grey test pattern, plus a phone camera pan, so you can judge scan lines and uniformity before the deposit.
What does the 3-year warranty cover?
Modules, power supplies, receiving cards and the cabinet structure. Wear parts such as fan filters are excluded, and spare parts stay available in Shenzhen for five years after the order.
Can you put our brand on the Outdoor LED Display Screen?
OEM is available from 20 m²: cabinet badge, carton print and manual, plus a firmware splash screen if you want the wall to show your brand at boot.
Request a price for the Outdoor LED Display Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Advertising LED Screens range, and you can compare p10 led display screen, outdoor rgb led display. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.
WeChat