Product Detail
The P5 Indoor LED Cabinet from Leyarled is a 640×640 mm indoor LED display for reception walls, retail and wayfinding, built around a P5 screen that resolves 16,384 pixels per cabinet. Cabinets are sealed to IP40, run 1,000 cd/m² with 1920-3840 Hz refresh, and ship with the layout drawing, control configuration and spare modules already matched to the order.


P5 Indoor LED Cabinet: key features
- NovaStar and ColorLight compatible control – sending cards, processors and cloud players can be sourced locally.
- IP40 sealed cabinet with pressure valve – the breathable valve equalises pressure so gaskets are not stressed.
- 1,000 cd/m² with automatic brightness control – daylight legible at 15 m, dimmed at night to stay inside local light rules.
- 8 modules per cabinet, 320×160 mm each – spares are interchangeable across the whole cabinet family.
P5 Indoor LED Cabinet technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P5 (5 mm) |
| Module size | 320×160 mm |
| Module count | 8 per cabinet |
| Cabinet size | 640×640 mm |
| Resolution per cabinet | 128×128 px (16,384) |
| Brightness | 1,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/8 |
| Protection | IP40 |
| LED lamp | Kinglight |
| Cabinet material | die-casting aluminum |
| Cabinet weight | about 9.8 kg (24 kg/m²) |
| Average power | about 217 W/m² |
| Viewing distance | 7.5 m minimum, 15 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P5 Indoor LED Cabinet. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P5 Indoor LED Cabinet is simple enough to check before you order: 640÷5 = 128 pixels across each cabinet and 640÷5 = 128 down, so six cabinets in a row resolve 768 pixels at 3.84 m wide. Viewing distance follows the pitch – 7.5 m before the pixel structure disappears, 15 m before body copy reads cleanly. Because the cabinet divides into 8 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
During the warranty period, we can repair or replace the defective unit for free, after the warranty time, we repair the defective unit and charge part cost.
We guarantee that each unit is tested carefully and works very well before shipment. We strive for 100% customer satisfaction on every sale we complete.


Where the P5 Indoor LED Cabinet is used
- Conference and hotel lobbies – welcome screens and event schedules.
- Corporate offices – reception media walls and internal comms.
- Education – lecture theatres and campus wayfinding.
- Retail stores – promotional walls and window displays.
Installation and service access
Indoor screens are typically wall-mounted on a bracket or recessed into a joinery frame. Because the viewing distance is short, we set brightness to 600-1200 nits and use a low-brightness calibration so the wall does not glare in a dim room.
A magnetic front-service module means the screen can sit flush against a finished wall. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P5 Indoor LED Cabinet: frequently asked questions
Can you build this P5 Indoor LED Cabinet in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
Do you supply the steel structure and drawings?
The drawing pack covers anchor spacing, a 48 kg load case for a 2.56×1.92 m wall and the wind pressure for your region. A local fabricator builds to it, and we check the shop drawing before cutting starts.
How is the P5 Indoor LED Cabinet shipped, and what spare parts come with it?
Each 640×640 mm cabinet is crated on its edge in a plywood case with foam corners, and the carton list matches the cabinet numbers on the layout drawing. A 2.56×1.92 m wall ships in roughly 4 cases plus one spares box.
Is the P5 Indoor LED Cabinet CE and RoHS certified?
CE, RoHS and FCC reports are issued against the BOM of this P5 cabinet, together with IEC 60068 climate and vibration reports. Certificates travel with the shipping documents.
Request a price for the P5 Indoor LED Cabinet
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Advertising LED Screens range, and you can compare p10 outdoor smd led screen, p4 outdoor led display screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.








