Product Detail
For sideline advertising and replay boards, the Stadium Perimeter LED Display is the model we quote most often: 960×960 mm cabinets, P10 pitch, 6,500 cd/m², IP65 sealing and 1920-3840 Hz refresh. Factory-direct from our Shenzhen line, 7-12 working days for standard cabinets, spare modules in every carton.


Stadium Perimeter LED Display: key features
- 18 modules per cabinet, 320×160 mm each – spares are interchangeable across the whole cabinet family.
- Front-service magnetic modules – maintenance does not need scaffold access behind the screen.
- 1920-3840 Hz refresh rate – no scan lines when a phone or broadcast camera pans across the screen.
- About 31.3 kg per cabinet, 280 W/m² average draw – power and structure can be sized from these two numbers before the layout is final.
Stadium Perimeter LED Display technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P10 (10 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 96×96 px (9,216) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1 / 4 |
| Protection | IP65 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 31.3 kg (34 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 15 m minimum, 30 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this Stadium Perimeter LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this Stadium Perimeter LED Display, start from whole cabinets: a 4×3 build gives a 3.84×2.88 m screen, 384×288 pixels (0.11 MP), about 346 kg of cabinet and an average load near 3,100 W. Add one row and the same cabinet family gives 3.84 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
Up-dated Multi Line LED Electronic Displays are easy to use and can be up-dated quickly and with no technical expertise
off-line running function: adopting the monolithic design technology and computer string communication way, which can operate in off-line state setting the dates and revising a data via the telephone line.


Where the Stadium Perimeter LED Display is used
- Multi-sport arenas – basketball, athletics and hockey venues that reuse one screen across seasons.
- Race circuits – long runs of panels along the track with quick-lock frames.
- Training grounds and academies – smaller banner runs for sponsorship during practice sessions.
- Football and soccer stadiums – pitch-side advertising boards that stay readable for broadcast cameras.
Installation and service access
The cabinets bolt onto a steel frame or a motorised goal-post system, and the top edge sits at roughly 900-1000 mm so players and officials are not obstructed. A front-service design keeps maintenance on the pitch side, which matters when the rear of the board faces a crowd barrier.
Protective soft-mask and anti-collision padding are recommended where players can slide into the board. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
Stadium Perimeter LED Display: frequently asked questions
What is the lead time for a Stadium Perimeter LED Display order?
Standard cabinets ship in 7-12 working days after the deposit clears; a full project with structure, control and commissioning takes 15-20 days. Custom cabinet sizes or curved frames add 3-5 days. We send a production photo set before the goods leave Shenzhen.
How many spare modules should I keep?
2-3% of the total module count, minimum two. For this cabinet that means one spare per 40 cabinets, or a full spare cabinet for a wall under 20 m².
Can you build this Stadium Perimeter LED Display in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
Do you supply the steel structure and drawings?
Structure drawings and load calculations are included with the order; the steel itself is usually fabricated locally to save freight. We review the workshop drawing before it is cut.
Request a price for the Stadium Perimeter LED Display
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Stadium Perimeter LED Display range, and you can compare p10 stadium perimeter led display, p8 stadium perimeter led display. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.








