Product Detail
Sized for reception walls, retail and wayfinding, this P4.81 Indoor Flexible Curtain LED Screen uses Kinglight LEDs at P4.81 inside a 500×500 mm die-cast aluminium cabinet, sealed to IP34 and calibrated to 1,000 cd/m². Leyarled has shipped this cabinet family since 2013 with a 3-year warranty and a 2-3% spare-module allowance in each case.


P4.81 Indoor Flexible Curtain LED Screen: key features
- IP34 sealed cabinet with pressure valve – rain, dust and pressure swings do not pull moisture into the module cavity.
- 1,000 cd/m² with automatic brightness control – daylight legible at 14 m, dimmed at night to stay inside local light rules.
- 4 modules per cabinet, 250×250 mm each – spares are interchangeable across the whole cabinet family.
- Front-service magnetic modules – a dead module is swapped from the front in minutes, no cabinet removal.
P4.81 Indoor Flexible Curtain LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P4.81 (4.81 mm) |
| Module size | 250×250 mm |
| Module count | 4 per cabinet |
| Cabinet size | 500×500 mm |
| Resolution per cabinet | 104×104 px (10,816) |
| Brightness | 1,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP34 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 6 kg (24 kg/m²) |
| Average power | about 217 W/m² |
| Viewing distance | 7.2 m minimum, 14 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P4.81 Indoor Flexible Curtain LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P4.81 Indoor Flexible Curtain LED Screen is simple enough to check before you order: 500÷4.81 = 104 pixels across each cabinet and 500÷4.81 = 104 down, so six cabinets in a row resolve 624 pixels at 3.0 m wide. Viewing distance follows the pitch – 7.2 m before the pixel structure disappears, 14 m before body copy reads cleanly. Because the cabinet divides into 4 standard 250×250 mm modules, a replacement module is never a custom order.
Where the P4.81 Indoor Flexible Curtain LED Screen is used
- Corporate offices – reception media walls and internal comms.
- Education – lecture theatres and campus wayfinding.
- Retail stores – promotional walls and window displays.
- Conference and hotel lobbies – welcome screens and event schedules.
Installation and service access
Indoor screens are typically wall-mounted on a bracket or recessed into a joinery frame. Because the viewing distance is short, we set brightness to 600-1200 nits and use a low-brightness calibration so the wall does not glare in a dim room.
A magnetic front-service module means the screen can sit flush against a finished wall. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P4.81 Indoor Flexible Curtain LED Screen: frequently asked questions
How many spare modules should I keep?
2-3% of the total module count, minimum two. For this cabinet that means one spare per 40 cabinets, or a full spare cabinet for a wall under 20 m².
Can you build this P4.81 Indoor Flexible Curtain LED Screen in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
Do you supply the steel structure and drawings?
The drawing pack covers anchor spacing, a 18 kg load case for a 2.0×1.5 m wall and the wind pressure for your region. A local fabricator builds to it, and we check the shop drawing before cutting starts.
How is the P4.81 Indoor Flexible Curtain LED Screen shipped, and what spare parts come with it?
Each 500×500 mm cabinet is crated on its edge in a plywood case with foam corners, and the carton list matches the cabinet numbers on the layout drawing. A 2.0×1.5 m wall ships in roughly 2 cases plus one spares box.
Request a price for the P4.81 Indoor Flexible Curtain LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under GOB LED Display range, and you can compare p1.66 indoor led cabinet, p10 outdoor flexible curtain led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.








