Product Detail
The P8 Outdoor LED Billboard from Leyarled is a factory-direct screen for roadside advertising and similar projects, built to run every day without babysitting. It uses a 8mm pixel pitch, 1920-3840 Hz refresh and a sealed cabinet, and it ships with the layout drawing, control configuration and spare modules already matched to your order.


P8 Outdoor LED Billboard: key features
- NovaStar and ColorLight compatible control – sending cards and processors can be sourced locally or supplied with the screen.
- Front-service magnetic modules – a failed module is swapped in minutes without removing the cabinet from the frame.
- P8 outdoor LED billboard with 1920-3840 Hz refresh – no scan lines on camera and no visible flicker in video playback.
- Sealed cabinet with pressure valve – moisture cannot be pulled in when the screen heats and cools through the day.
Technical specifications
| Parameter | Value |
|---|---|
| Pixel pitch | 8mm |
| Brightness | 6500-7500 cd/sqm |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/4 |
| Protection | IP65 front / IP54 rear |
| LED lamp | Epistar |
| Cabinet material | Die-casting Aluminum |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
Values above are the standard configuration for this P8 Outdoor LED Billboard. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production starts. Panels are tested against IEC 60068 environmental test methods for temperature, humidity and vibration.
Product details
- High brightness, ≥4000cd/㎡, is the only large display terminal that can be used all day in outdoors
- Large viewing angle. The Indoor angle of view is ≥ 160 degrees, the outdoor viewing angle is ≥ 120 degrees
- An Intelligent control system, two kinds of systems, directly controlled by computer, or by WiFi.
- Compared with the Lcd display, the led display can be arbitrarily formed into a shape and seamlessly spliced.
- The product structure is resistant to 100 Km / h wind and 8 earthquakes.


Where the P8 Outdoor LED Billboard is used
- Roadside advertising – high-brightness boards read from 80-150 m at speed.
- Rooftop media – steel-frame structures for city-centre rooftops.
- Shopping mall facades – DOOH screens facing pedestrian traffic.
- Fuel stations and drive-throughs – small-format boards with remote content scheduling.
A note on the P8 Outdoor LED Billboard: a billboard’s running cost is dominated by power and content, so the cabinet is tuned for high brightness at a low average draw.
Installation, delivery and warranty
For the P8 Outdoor LED Billboard, billboards are engineered as a steel structure: the cabinet array is fixed to a hot-dip galvanised frame and the control cabinet sits in a weatherproof enclosure at the base. We provide the structure drawing, wind-load notes and the power distribution plan.
Automatic brightness sensors are included so the screen dims at night and stays within local light-pollution rules. Delivery is 7-12 working days for standard cabinets and 15-20 days for a full project with structure and control. The screen carries a 3-year warranty covering modules, power supplies and receiving cards, with spare parts held in Shenzhen for five years after the order.
Frequently asked questions
What is the lead time for a P8 Outdoor LED Billboard order?
Standard P8 cabinets ship 7-12 working days after the deposit clears. Custom cabinet sizes, curved frames or a project-specific power distribution add 3-5 days. We send a production photo set before the goods leave the factory.
Can you build this P8 Outdoor LED Billboard in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
How is the P8 Outdoor LED Billboard shipped and what about spare parts?
Plywood case or flight case, sea or air freight, with a 2-3% spare module and power supply allowance included in the carton. Every order carries a serial list so a spare module can be matched to the cabinet it came from.
Request a quote for the P8 Outdoor LED Billboard
Send the screen size, viewing distance and project country to our engineers and you will get a layout drawing, a resolution map and a factory price within 24 hours. More models in this range are listed under Advertising LED Screens, and you can reach the sales team through the contact page. If you are comparing suppliers, ask each one for the same three things: module brand, power supply brand and the spare-part ratio in the carton – that is where quotations usually differ.








