Product Detail
Leyarled builds this P6 Outdoor RGB LED Display in Shenzhen on a 960×960 mm die-cast aluminium cabinet: P6 Kinglight LEDs, 25,600 pixels per panel, 7,000 cd/m² and IP65. It is the configuration most outdoor commercial buyers settle on when they need facade media and entrance signage to run daily without a local engineer.


P6 Outdoor RGB LED Display: key features
- About 30.4 kg per cabinet, 273 W/m² average draw – power and structure can be sized from these two numbers before the layout is final.
- Kinglight LEDs on a die-cast aluminium cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
- Factory calibration before packing – brightness and colour bins are matched across cabinets so a 40 m² wall reads as one surface.
- 25,600 pixels per cabinet (P6, 960×960 mm) – a 4×3 wall lands at 640×480 (0.31 MP) without any custom cutting.
P6 Outdoor RGB LED Display technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P6 (6 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 160×160 px (25,600) |
| Brightness | 7,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP65 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 273 W/m² |
| Viewing distance | 9 m minimum, 18 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 5 years |
The table shows the standard build for this P6 Outdoor RGB LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P6 Outdoor RGB LED Display is simple enough to check before you order: 960÷6 = 160 pixels across each cabinet and 960÷6 = 160 down, so six cabinets in a row resolve 960 pixels at 5.76 m wide. Viewing distance follows the pitch – 9 m before the pixel structure disappears, 18 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
We offer you TEAMVIEWER help by Online Video and can send professional engineer to your city to offer on-site guide.
A: We accept T/T, Alibaba Trade Assurance, Western Union and Cash. At least 30-50 % deposit in advance, and the balance should be paid before delivery.


Where the P6 Outdoor RGB LED Display is used
- Car parks and petrol stations – high-brightness panels with automatic dimming.
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 5-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P6 Outdoor RGB LED Display: frequently asked questions
How many spare modules should I keep?
Budget 2-3% of modules plus one power supply per 20 cabinets. A spare module is a five-minute swap, so the stock is insurance against downtime, not a repair plan.
Can you build this P6 Outdoor RGB LED Display in a custom size?
Any size built from 960×960 mm cabinets, plus half-cabinet trims where a wall cannot take a full module. You get a drawing with the pixel count and centre-to-centre dimensions to check against the building.
Do you supply the steel structure and drawings?
Structure drawings and load calculations are included with the order; the steel itself is usually fabricated locally to save freight. We review the workshop drawing before it is cut.
How is the P6 Outdoor RGB LED Display shipped, and what spare parts come with it?
Each 960×960 mm cabinet is crated on its edge in a plywood case with foam corners, and the carton list matches the cabinet numbers on the layout drawing. A 3.84×2.88 m wall ships in roughly 9 cases plus one spares box.
Request a price for the P6 Outdoor RGB LED Display
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Advertising LED Screens range, and you can compare p16 outdoor led billboard, p10 led billboard. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







