Product Detail
The P6 Indoor SMD LED Screen from Leyarled is a 640×480 mm indoor LED display for reception walls, retail and wayfinding, built around a P6 screen that resolves 8,560 pixels per cabinet. Cabinets are sealed to IP54, run 1,000 cd/m² with 1920-3840 Hz refresh, and ship with the layout drawing, control configuration and spare modules already matched to the order.


P6 Indoor SMD LED Screen: key features
- Factory calibration before packing – brightness and colour bins are matched across cabinets so a 40 m² wall reads as one surface.
- 8,560 pixels per cabinet (P6, 640×480 mm) – so a wall built from whole cabinets never needs a half-module filler.
- NovaStar and ColorLight compatible control – sending cards, processors and cloud players can be sourced locally.
- IP54 sealed cabinet with pressure valve – rain, dust and pressure swings do not pull moisture into the module cavity.
P6 Indoor SMD LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P6 (6 mm) |
| Module size | 320×160 mm |
| Module count | 6 per cabinet |
| Cabinet size | 640×480 mm |
| Resolution per cabinet | 107×80 px (8,560) |
| Brightness | 1,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP54 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 7.4 kg (24 kg/m²) |
| Average power | about 217 W/m² |
| Viewing distance | 9 m minimum, 18 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 2 years |
The table shows the standard build for this P6 Indoor SMD LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P6 Indoor SMD LED Screen is simple enough to check before you order: 640÷6 = 107 pixels across each cabinet and 480÷6 = 80 down, so six cabinets in a row resolve 642 pixels at 3.84 m wide. Viewing distance follows the pitch – 9 m before the pixel structure disappears, 18 m before body copy reads cleanly. Because the cabinet divides into 6 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
P3mm, P4mm or even P5mm, but it owns a more stability performance than low smaller pixel pitch indoor led displays, and at last, most of customers would finally choose P6mm LED display because of its high cost – effective, it is considered to be the first choice for most of indoor application, in the meantime, it is also the most one of our recommended products for indoor advertising media application.
with 27777 pixels density per square meter and 6mm pixel pitch, it is available to satisfy the needs of people who are looking for high resolution LED display. although its resolution is lower than P2.5mm,


Where the P6 Indoor SMD LED Screen is used
- Corporate offices – reception media walls and internal comms.
- Education – lecture theatres and campus wayfinding.
- Retail stores – promotional walls and window displays.
- Conference and hotel lobbies – welcome screens and event schedules.
Installation and service access
Indoor screens are typically wall-mounted on a bracket or recessed into a joinery frame. Because the viewing distance is short, we set brightness to 600-1200 nits and use a low-brightness calibration so the wall does not glare in a dim room.
A magnetic front-service module means the screen can sit flush against a finished wall. 2-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P6 Indoor SMD LED Screen: frequently asked questions
What is the lead time for a P6 Indoor SMD LED Screen order?
7-12 working days for standard P6 cabinets, 15-20 days if the order includes steel structure and on-site commissioning. Sea freight to most ports adds 18-35 days depending on the route.
How many spare modules should I keep?
2-3% of the total module count, minimum two. For this cabinet that means one spare per 40 cabinets, or a full spare cabinet for a wall under 20 m².
Can you build this P6 Indoor SMD LED Screen in a custom size?
Any size built from 640×480 mm cabinets, plus half-cabinet trims where a wall cannot take a full module. You get a drawing with the pixel count and centre-to-centre dimensions to check against the building.
Do you supply the steel structure and drawings?
Yes. We issue the cabinet layout, a steel-frame drawing, wind-load notes and the power distribution plan, so a local fabricator can build the structure to our dimensions.
Request a price for the P6 Indoor SMD LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Indoor Full Color LED Display range, and you can compare p1.92 indoor led display screen, p4 indoor led display screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.








