Product Detail
Sized for facade media and entrance signage, this P6 Outdoor Rental LED Screen uses Kinglight LEDs at P6 inside a 960×960 mm die-cast aluminium cabinet, sealed to IP65 and calibrated to 5,000 cd/m². Leyarled has shipped this cabinet family since 2013 with a 3-year warranty and a 2-3% spare-module allowance in each case.


P6 Outdoor Rental LED Screen: key features
- 25,600 pixels per cabinet (P6, 960×960 mm) – a 4×3 wall lands at 640×480 (0.31 MP) without any custom cutting.
- NovaStar and ColorLight compatible control – sending cards, processors and cloud players can be sourced locally.
- IP65 sealed cabinet with pressure valve – the breathable valve equalises pressure so gaskets are not stressed.
- 5,000 cd/m² with automatic brightness control – daylight legible at 18 m, dimmed at night to stay inside local light rules.
P6 Outdoor Rental LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P6 (6 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 160×160 px (25,600) |
| Brightness | 5,000 cd/m² (auto dimming) |
| Refresh rate | 3840 Hz |
| Scan mode | 1/6 |
| Protection | IP65 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 273 W/m² |
| Viewing distance | 9 m minimum, 18 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P6 Outdoor Rental LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P6 Outdoor Rental LED Screen is simple enough to check before you order: 960÷6 = 160 pixels across each cabinet and 960÷6 = 160 down, so six cabinets in a row resolve 960 pixels at 5.76 m wide. Viewing distance follows the pitch – 9 m before the pixel structure disappears, 18 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
3)The column adopts plug-and-play design power and signal connectors, which are easy to install and disassemble, satisfying the rental application under any circumstances.
2)The thickness of the panel is only 80mm and the weight is only 13KG. It can be easily lifted by an adult with one hand, and 12 square meters can be installed in just 30 minutes by two people working together.


Where the P6 Outdoor Rental LED Screen is used
- Car parks and petrol stations – high-brightness panels with automatic dimming.
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P6 Outdoor Rental LED Screen: frequently asked questions
How many spare modules should I keep?
Budget 2-3% of modules plus one power supply per 20 cabinets. A spare module is a five-minute swap, so the stock is insurance against downtime, not a repair plan.
Can you build this P6 Outdoor Rental LED Screen in a custom size?
Any size built from 960×960 mm cabinets, plus half-cabinet trims where a wall cannot take a full module. You get a drawing with the pixel count and centre-to-centre dimensions to check against the building.
Do you supply the steel structure and drawings?
Yes. We issue the cabinet layout, a steel-frame drawing, wind-load notes and the power distribution plan, so a local fabricator can build the structure to our dimensions.
How is the P6 Outdoor Rental LED Screen shipped, and what spare parts come with it?
Export packing is plywood with foam, and each case is labelled by cabinet position so installation follows the drawing. Spares: 2-3% modules, 1% power supplies, 1% receiving cards.
Request a price for the P6 Outdoor Rental LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Outdoor Rental Cabient range, and you can compare p2.9 rental led screen, p3.91 outdoor rental led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.






