LEYARLED — Focus On LED Screen Field For More Than 10 Years.

P2.5 Indoor Front Service Video LED Screen 640×480 Die-cast Magnetic

P2.5 Indoor Front Service Video LED Screen 640×480 Die-cast Magnetic

Vios P2 Indoor 640x480 Die-cast Magnetic Front Service HD LED Display Panel Features: 1. Maintain the LED module before using the magnet, it is very easy to install and remove 2. 640x480mm box, moderate size, easy to install, you can use vacuum suction tool to quickly remove the module

Product Detail

Sized for reception walls, retail and wayfinding, this P2.5 Indoor LED Display Screen uses Kinglight LEDs at P2.5 inside a 640×480 mm die-cast aluminum cabinet, sealed to IP31 and calibrated to 1,000 cd/m². Leyarled has shipped this cabinet family since 2013 with a 3-year warranty and a 2-3% spare-module allowance in each case.

P2.5 Indoor LED Display Screen 640x480mm indoor LED display - Leyarled

P2.5 Indoor LED Display Screen: key features

  • 1920-3840 Hz refresh rate – keeps colour stable on camera, which matters for televised advertising.
  • About 7.4 kg per cabinet, 217 W/m² average draw – power and structure can be sized from these two numbers before the layout is final.
  • Kinglight LEDs on a die-cast aluminum cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
  • Factory calibration before packing – each cabinet carries its own calibration file for field re-tuning.

P2.5 Indoor LED Display Screen technical specification

Parameter Value
Pixel pitch P2.5 (2.5 mm)
Module size 320×160 mm
Module count 6 per cabinet
Cabinet size 640×480 mm
Resolution per cabinet 256×192 px (49,152)
Brightness 1,000 cd/m² (auto dimming)
Refresh rate 1920-3840 Hz
Scan mode constant current, high scan
Protection IP31
LED lamp Kinglight
Cabinet material die-cast aluminum
Cabinet weight about 7.4 kg (24 kg/m²)
Average power about 217 W/m²
Viewing distance 3.8 m minimum, 8 m comfortable
Lifespan 100,000 hours
Warranty 3 years

The table shows the standard build for this P2.5 Indoor LED Display Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.

How the numbers work on a real wall

To size this P2.5 Indoor LED Display Screen, start from whole cabinets: a 4×3 build gives a 2.56×1.44 m screen, 1024×576 pixels (0.59 MP), about 27 kg of cabinet and an average load near 800 W. Add one row and the same cabinet family gives 1.92 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.

Product details

Parts included: High-quality cabinets, LED modules, power supplies, NOVASTAR receiving card, power cables and signal cables. It does not include sending card. You can order the sending card by this link: NOVASTAR MSD300 sending card.

Tariff: Our price does not include any tariff or duties at the destination, you should do import customs clearance and pay all tariff or duties locally.

P2.5 Indoor LED Display Screen 640x480mm indoor LED display - Leyarled

Where the P2.5 Indoor LED Display Screen is used

  • Education – lecture theatres and campus wayfinding.
  • Retail stores – promotional walls and window displays.
  • Conference and hotel lobbies – welcome screens and event schedules.
  • Corporate offices – reception media walls and internal comms.

Installation and service access

Indoor screens are typically wall-mounted on a bracket or recessed into a joinery frame. Because the viewing distance is short, we set brightness to 600-1200 nits and use a low-brightness calibration so the wall does not glare in a dim room.

A magnetic front-service module means the screen can sit flush against a finished wall. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.

P2.5 Indoor LED Display Screen: frequently asked questions

What is the lead time for a P2.5 Indoor LED Display Screen order?

7-12 working days for standard P2.5 cabinets, 15-20 days if the order includes steel structure and on-site commissioning. Sea freight to most ports adds 18-35 days depending on the route.

How many spare modules should I keep?

2-3% of the total module count, minimum two. For this cabinet that means one spare per 40 cabinets, or a full spare cabinet for a wall under 20 m².

Can you build this P2.5 Indoor LED Display Screen in a custom size?

Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.

Do you supply the steel structure and drawings?

Yes. We issue the cabinet layout, a steel-frame drawing, wind-load notes and the power distribution plan, so a local fabricator can build the structure to our dimensions.

Request a price for the P2.5 Indoor LED Display Screen

Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Indoor LED Panel 640×480 range, and you can compare p1.25 indoor led display screen, p2.5 indoor led cabinet. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.

Get In Touch With Us

We are glad to work together with you and finally bring you the satisfied products.

  • Reply within 12 hours, 24/7 online service
  • Free solution design according to your project size
  • OEM & ODM accepted, logo printing on panel and package
  • 6-year warranty and lifetime technical support

sales@leyarled.com

Send Your Inquiry

We will reply to you within 12 working hours.

By using this form you agree with the storage and handling of your data by this website.

WeChat QR code WeChat +86 189 2343 2534 liujinmiao@wehchi.com WhatsApp: +86 189 2343 2534
P2.5 Indoor LED Display Screen product photo - photo 16 of 16
P2.5 Indoor Front Service Video LED Screen 640×480 Die-cast Magnetic