Product Detail
Leyarled builds this P10 Outdoor Hanging LED Screen in Shenzhen on a 960×960 mm die-cast aluminium cabinet: P10 Epistar LEDs, 9,216 pixels per panel, 5,000 cd/m² and IP65. It is the configuration most outdoor commercial buyers settle on when they need facade media and entrance signage to run daily without a local engineer.


P10 Outdoor Hanging LED Screen: key features
- Epistar LEDs on a die-cast aluminium cabinet – both parts are held as spares in Shenzhen for five years after the order.
- Factory calibration before packing – each cabinet carries its own calibration file for field re-tuning.
- 9,216 pixels per cabinet (P10, 960×960 mm) – so a wall built from whole cabinets never needs a half-module filler.
- NovaStar and ColorLight compatible control – sending cards, processors and cloud players can be sourced locally.
P10 Outdoor Hanging LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P10 (10 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 96×96 px (9,216) |
| Brightness | 5,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/4 |
| Protection | IP65 |
| LED lamp | Epistar |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 15 m minimum, 30 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P10 Outdoor Hanging LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this P10 Outdoor Hanging LED Screen, start from whole cabinets: a 4×3 build gives a 3.84×2.88 m screen, 384×288 pixels (0.11 MP), about 336 kg of cabinet and an average load near 3,100 W. Add one row and the same cabinet family gives 3.84 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
LED Module is the smallest unit of LED display system, which is composed of LED cabinet. With LED cabinets, we build the LED Display Screen of different sizes basing on the requirement from customers
Even in direct, full-on sunlight to ensure you attract more audience to get short ROI of your LED display screen’s investment.


Where the P10 Outdoor Hanging LED Screen is used
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P10 Outdoor Hanging LED Screen: frequently asked questions
What is the lead time for a P10 Outdoor Hanging LED Screen order?
7-12 working days for standard P10 cabinets, 15-20 days if the order includes steel structure and on-site commissioning. Sea freight to most ports adds 18-35 days depending on the route.
How many spare modules should I keep?
2-3% of the total module count, minimum two. For this cabinet that means one spare per 40 cabinets, or a full spare cabinet for a wall under 20 m².
Can you build this P10 Outdoor Hanging LED Screen in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
Do you supply the steel structure and drawings?
The drawing pack covers anchor spacing, a 336 kg load case for a 3.84×2.88 m wall and the wind pressure for your region. A local fabricator builds to it, and we check the shop drawing before cutting starts.
Request a price for the P10 Outdoor Hanging LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Hanging LED Display range, and you can compare p5 hanging led screen, p3.91 hanging led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







