|Scanning Mode:||1/16 Scanning||Module Size:||160x160mm/320mmx160mm|
|Cabinet Size:||480x480mm||Certificates:||CE RoHS FCC CCC UL|
|IC:||MB5124/MB5024||Application:||Stadium,airport,shopping Mall,street Advertising|
|High Light:||led full color screen, indoor led display screen|
1) High refresh rate , high brightness and high contrast which make the screen without any delay and smear phenomenon under directly sunlight.
2)Energy saving:low electric current,high-bright lamps,equipped with PFC switching power supply that save 30% electricty.
3)The brightness can be adjustable to meet the need of changing environment
4)Wide viewing angle: The horizontal and vertical viewing angles are so wide that it is suitable for wide horizontal
5)Environment protection, antistatic, dust-proof, good heat dissipation, cost-effective .
6)Error detection and monitoring:it can monitor the inner temperature,voltage,cooling fans etc and error detection automatically.
7) High reliability: using distributed scanning technology and module design technology that make higher reliability and stability.
8) Steady and reliable system:with strong anti-interference ability and long service life that can continually work for over 24 hours, and it’s easy to operate the system.
9) Favorable effect: using dot to dot calibration technology makes the image clearer and the layering stronger
10) Convenient installation and maintenance of display modules
|outdoor DIP P2.5|
|Single point brightness adjust||Can be added|
|Single point color adjust||Can be added|
|White balance brightness||>7500cd/㎡|
|Horizontal view angle||120(degrees)|
|Vertical view angle||60(degrees)|
|Signal Process bit||10 or 16bit|
|Grey process||1024x1024x1024 16834x16834x16834 65536x65536x65536|
|Control distances||Internet cable:100m, multimembrane:500m, monofilm:2km|
|Driving mode||Constant driving current|
|Scanning mode||1/30 SCANNING|
|Control mode||Computer synchronous|
|Brightness adjusted range||Manual, automatic operation, stepless continuous adjusted|
|255 steps. No grey loss|
|Out of control point||<1/10000|
|Mean Time Between Failure||>5000hours|
|Environment temperature range||Operating temperature range: -20-45℃|
|Self-check technology||LED spot self-check, communications check, power check,|
|temperature monitor(need customization)|
|Remote monitoring||Remote supervision and control, record potential fault,|
|send out warning signs to the operators.(need customization)|
|Luminous point width between centres||Deviation<3%|
|Color uniformity(chromaticity coordinate)||±0.003|
|Power supply request||AC85-264V(50Hz-60Hz)|
|System protection||Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration|
Important Knowledge of Led display
1. What is LED?
LED is sanded for Light Emitting Diode, a kind of semiconductor which is used to give and receive the electronic signal into infrared rays or light, using the characteristics of compound semiconductor. This is used for household appliances, remote controller, electric bulletin board, various kinds of automation appliances.
2. What are Pixel Pitch, Pixel Density, LED QTY, and Pixel Configuration?
Pixel Pitch is the distance between neighboring pixels.
Pixel Density is the quantity of pixels per square meter.
LED QTY is the quantity of LED lamps per square.
Pixel Configuration is the description of the consistence of a pixel, for instance, we use 1 red lamp, 1 green lamp, and 1 blue lamp to compose a pixel, the pixel configuration is 1R1G1B.
3. What are LED Type, Module size and Module resolution?
LED Type is the description of LED lamp, for instance, the brand, the shape in physical, the size of the lamp, etc.
Module size is the measurement of a module.
Module resolution is the number of pixels per module.
4. What is Drive Method, driving IC and Power supply
Drive Method: always we use static, 1/4 scan, 1/8 scan, 1/16 scan, the latter one contributes to less brightness than the former. We always use the static outdoor, and use the different kinds of scan indoor.
Driving IC is the generic term for several kinds of IC, that are used to control the LED lamps, and as a bridge between the control system and lamps.
Power supply: a kind of device that used as a transfer from 220V AC into 5V DC. It always seems like a box in the cabinet.
5. What is viewing angle?
Viewing angle is the maximum angle at which a display can be viewed with acceptable visual performance. It includes horizontal viewing angle and vertical viewing angle.
Package and Delivery:
|Q1: What’s the warranty of your LED Display Screen ?A1: We have a 3-year warranty for our led display screen, and 100,000 hours life span of the led lamps.|
|Q2: What about your pre-sale service and post-sale service?A2: For pre-sale service: We have a professional sales team and 13 years technical team who are willing to answer your question 24/7. We can offer a whole complete solution for your project!
For post-sale service: We can instruct you how to use, adjust the screens, and change the broken modules with spare parts.
Also, we can send technicians to your country to solve problems. Mostly, our led display will not have big problems within warranty time!
|Q3: Whats your payment term? How long it takes to delivery?A3: We accept T/T and L/C, For both T/T and L/C, At least 30% deposit in advance, and the rest 70% before delivery.
Our average Production time is 16 days, after receiving the deposit.
|Q4: What’s the control system?A4: For synchronization control: We use Nova, Linsn Or Colorlight control system.
For asynchronous control: We use ONBON or XIXUN control system.
|Q5: How can you ensure the led display product quality?A5: Our led display screen quality is our core competence, for 8 years, what we rely on.
We have each standard process to make quality products.
If any quality failures within warranty time, we will refund you .
Welcome to visit our website and inquire us more info,waiting for you all the time!!!
Contact Person: HERO
Email : [email protected]
Skype: [email protected]
Wechat & Whatsapp & Mobile : +86 18923432534
Linkedin : :https://www.linkedin.com/feed/
Shenzhen Vios Electronic Technoloy Co., Ltd
“customer first, integrity first, innovation, and strive for perfection”
Add : Room C411 Floor 4, C Building, Sijixingcheng, Zhenming Road No.161, Gongming Town, Guangming new district, Shenzhen City, China