Product Detail
The P1.8 Indoor GOB LED Display from Leyarled is a factory-direct screen for retail and brand stores and similar projects, built to run every day without babysitting. It uses a 1.8mm pixel pitch, 3840 Hz refresh and a sealed cabinet, and it ships with the layout drawing, control configuration and spare modules already matched to your order.


P1.8 Indoor GOB LED Display: key features
- NovaStar and ColorLight compatible control – sending cards and processors can be sourced locally or supplied with the screen.
- Front-service magnetic modules – a failed module is swapped in minutes without removing the cabinet from the frame.
- P1.8 GOB LED display with 3840 Hz refresh – no scan lines on camera and no visible flicker in video playback.
- Sealed cabinet with pressure valve – moisture cannot be pulled in when the screen heats and cools through the day.
Technical specifications
| Parameter | Value |
|---|---|
| Pixel pitch | 1.8mm |
| Module size | 240*240mm |
| Cabinet size | 480*480mm |
| Brightness | 800-1200 cd/sqm (adjustable) |
| Refresh rate | 3840 Hz |
| Scan mode | 1/32 |
| Protection | IP40-IP54 indoor |
| LED lamp | Kinglight / Nationstar |
| Cabinet material | Die-casting Aluminum |
| Lifespan | 100,000 hours |
| Warranty | 1 years |
Values above are the standard configuration for this P1.8 Indoor GOB LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production starts. Panels are tested against IEC 60068 environmental test methods for temperature, humidity and vibration.
Product details
It uses an advanced new transparent material to package the substrate and its LED unit board to form an effective protection.
A: We mostly accectp FOB train term, but we can help you order and arrange shipping agent. It usually take 20 30 day on sea. a few days for customer clearance
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
For defective batch products, we will repair them and resend them to you or we can discuss the solution


Where the P1.8 Indoor GOB LED Display is used
- Retail and brand stores – close-viewing screens that resist knocks and dust.
- Meeting and board rooms – fine-pitch walls for presentations and video calls.
- Control rooms – 24/7 operation with a sealed, easy-clean surface.
- Museum and exhibition walls – near-field viewing with no visible module seams.
A note on the P1.8 Indoor GOB LED Display: gOB sealing costs a little more per square metre than plain SMD, and it pays back the first time a screen in a public space survives an impact.
Installation, delivery and warranty
For the P1.8 Indoor GOB LED Display, gOB modules are glued at the surface, so the panel front is sealed against dust and moisture. That makes the display suitable for public touch-height installation where conventional SMD modules would lose pixels to impact damage.
Front-service magnetic modules keep maintenance to a single module swap without removing the cabinet. Delivery is 7-12 working days for standard cabinets and 15-20 days for a full project with structure and control. The screen carries a 3-year warranty covering modules, power supplies and receiving cards, with spare parts held in Shenzhen for five years after the order.
Frequently asked questions
What is the lead time for a P1.8 Indoor GOB LED Display order?
Standard P1.8 cabinets ship 7-12 working days after the deposit clears. Custom cabinet sizes, curved frames or a project-specific power distribution add 3-5 days. We send a production photo set before the goods leave the factory.
Can you build this P1.8 Indoor GOB LED Display in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
How is the P1.8 Indoor GOB LED Display shipped and what about spare parts?
Plywood case or flight case, sea or air freight, with a 2-3% spare module and power supply allowance included in the carton. Every order carries a serial list so a spare module can be matched to the cabinet it came from.
Request a quote for the P1.8 Indoor GOB LED Display
Send the screen size, viewing distance and project country to our engineers and you will get a layout drawing, a resolution map and a factory price within 24 hours. More models in this range are listed under GOB LED Display, and you can reach the sales team through the contact page. If you are comparing suppliers, ask each one for the same three things: module brand, power supply brand and the spare-part ratio in the carton – that is where quotations usually differ.







