Product Detail
The P10 Outdoor SMD LED Screen is a factory-direct outdoor LED display with a 960×960 mm cabinet that weighs about 30.4 kg and draws roughly 280 W/m² on average. Screen resolution works out at 96×96 per cabinet, so one panel already covers 9,216 pixels of facade media and entrance signage.
P10 Outdoor SMD LED Screen: key features
- About 30.4 kg per cabinet, 280 W/m² average draw – a 3.84×2.88 m wall weighs roughly 336 kg and pulls 3,100 W.
- Nationstar LEDs on a die-casting aluminum cabinet – both parts are held as spares in Shenzhen for five years after the order.
- Factory calibration before packing – each cabinet carries its own calibration file for field re-tuning.
- 9,216 pixels per cabinet (P10, 960×960 mm) – a 4×3 wall lands at 384×288 (0.11 MP) without any custom cutting.
P10 Outdoor SMD LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P10 (10 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 96×96 px (9,216) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP68 |
| LED lamp | Nationstar |
| Cabinet material | die-casting aluminum |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 15 m minimum, 30 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P10 Outdoor SMD LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P10 Outdoor SMD LED Screen is simple enough to check before you order: 960÷10 = 96 pixels across each cabinet and 960÷10 = 96 down, so six cabinets in a row resolve 576 pixels at 5.76 m wide. Viewing distance follows the pitch – 15 m before the pixel structure disappears, 30 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
Die-casting aluminum chassis, recycle rate 90% for the whole product. Long lifetime, 30% Redundancy while use 7000nits. Using 10000nits,3000nits can sustain 7000nits using for 5 years, Good heat dissipation performance
Dual service mode of front and rear design to save you Maintenance Cost. The LED panel can be assemble and disassemble easily and quickly.
Where the P10 Outdoor SMD LED Screen is used
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P10 Outdoor SMD LED Screen: frequently asked questions
Do you supply the steel structure and drawings?
Structure drawings and load calculations are included with the order; the steel itself is usually fabricated locally to save freight. We review the workshop drawing before it is cut.
How is the P10 Outdoor SMD LED Screen shipped, and what spare parts come with it?
Plywood case or flight case, sea or air freight, with a 2-3% spare module and power-supply allowance in the carton. Every order carries a serial list so a spare can be matched to the cabinet it came from.
Is the P10 Outdoor SMD LED Screen CE and RoHS certified?
CE and RoHS as standard, FCC on request, and IEC 60068 test reports for temperature, humidity and vibration on the cabinet.
What brightness do I need for this P10 Outdoor SMD LED Screen?
This model is set to 6,500 cd/m². For a north-facing wall or an indoor position, 800-1,500 cd/m² is enough; direct sun needs 5,000 cd/m² and above. Keep 3x headroom over ambient light and let the auto-dimming sensor handle the rest.
Request a price for the P10 Outdoor SMD LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Outdoor LED Screen range, and you can compare p6.67 outdoor led display module, p8 outdoor smd led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







