Product Detail
This P3 Outdoor LED Billboard pairs a 960×960 mm cabinet with 18 modules and 320×320 pixel resolution per panel. At P3 it is readable from 4.5 m, puts out 6,500 cd/m², and carries a 3-year warranty on modules, power supplies and receiving cards.
P3 Outdoor LED Billboard: key features
- Front-service magnetic modules – a dead module is swapped from the front in minutes, no cabinet removal.
- 1920-3840 Hz refresh rate – keeps colour stable on camera, which matters for televised advertising.
- About 33.2 kg per cabinet, 298 W/m² average draw – power and structure can be sized from these two numbers before the layout is final.
- Kinglight LEDs on a die-cast aluminium cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
P3 Outdoor LED Billboard technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P3 (3 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 320×320 px (102,400) |
| Brightness | 6,500 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | constant current, high scan |
| Protection | IP65 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 33.2 kg (36 kg/m²) |
| Average power | about 298 W/m² |
| Viewing distance | 4.5 m minimum, 9 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P3 Outdoor LED Billboard. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P3 Outdoor LED Billboard is simple enough to check before you order: 960÷3 = 320 pixels across each cabinet and 960÷3 = 320 down, so six cabinets in a row resolve 1,920 pixels at 5.76 m wide. Viewing distance follows the pitch – 4.5 m before the pixel structure disappears, 9 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
Ultra-thin Easy to shape up a product by,magnuesium alloy, which can make high-end, thin products and make the cabinet thickness thinner
1. Ultra-light Diecasting Mag alloy density is 2/3 of Alloy and 1/4 of steel,which makes the cabinet more light weight compare to
Where the P3 Outdoor LED Billboard is used
- Rooftop media – steel-frame structures for city-centre rooftops.
- Shopping mall facades – DOOH screens facing pedestrian traffic.
- Fuel stations and drive-throughs – small-format boards with remote content scheduling.
- Roadside advertising – high-brightness boards read from 80-150 m at speed.
Installation and service access
Billboards are engineered as a steel structure: the cabinet array is fixed to a hot-dip galvanised frame and the control cabinet sits in a weatherproof enclosure at the base. We provide the structure drawing, wind-load notes and the power distribution plan.
Automatic brightness sensors are included so the screen dims at night and stays within local light-pollution rules. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P3 Outdoor LED Billboard: frequently asked questions
How many spare modules should I keep?
Budget 2-3% of modules plus one power supply per 20 cabinets. A spare module is a five-minute swap, so the stock is insurance against downtime, not a repair plan.
Can you build this P3 Outdoor LED Billboard in a custom size?
Yes. Send the wall width, height and viewing distance and our engineer returns a cabinet layout, a resolution map and a power estimate within 24 hours. Non-standard sizes are cut from the same cabinet family, so spares stay interchangeable.
Do you supply the steel structure and drawings?
Yes. We issue the cabinet layout, a steel-frame drawing, wind-load notes and the power distribution plan, so a local fabricator can build the structure to our dimensions.
How is the P3 Outdoor LED Billboard shipped, and what spare parts come with it?
Plywood case or flight case, sea or air freight, with a 2-3% spare module and power-supply allowance in the carton. Every order carries a serial list so a spare can be matched to the cabinet it came from.
Request a price for the P3 Outdoor LED Billboard
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Advertising LED Screens range, and you can compare p8 led cabinet, p4 stadium led screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.









