Product Detail
Sized for reception walls, retail and wayfinding, this P5 Indoor LED Display Screen uses Kinglight LEDs at P5 inside a 640×640 mm die-cast aluminium cabinet, sealed to IP54 and calibrated to 1,000 cd/m². Leyarled has shipped this cabinet family since 2013 with a 5-year warranty and a 2-3% spare-module allowance in each case.


P5 Indoor LED Display Screen: key features
- NovaStar and ColorLight compatible control – sending cards, processors and cloud players can be sourced locally.
- IP54 sealed cabinet with pressure valve – the breathable valve equalises pressure so gaskets are not stressed.
- 1,000 cd/m² with automatic brightness control – the sensor trims output after dusk instead of running flat out.
- 8 modules per cabinet, 320×160 mm each – module size is standard, so replacements are never a custom order.
P5 Indoor LED Display Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P5 (5 mm) |
| Module size | 320×160 mm |
| Module count | 8 per cabinet |
| Cabinet size | 640×640 mm |
| Resolution per cabinet | 128×128 px (16,384) |
| Brightness | 1,000 cd/m² (auto dimming) |
| Refresh rate | 480 Hz |
| Scan mode | 1/ 16 |
| Protection | IP54 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 9.8 kg (24 kg/m²) |
| Average power | about 217 W/m² |
| Viewing distance | 7.5 m minimum, 15 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 5 years |
The table shows the standard build for this P5 Indoor LED Display Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P5 Indoor LED Display Screen is simple enough to check before you order: 640÷5 = 128 pixels across each cabinet and 640÷5 = 128 down, so six cabinets in a row resolve 768 pixels at 3.84 m wide. Viewing distance follows the pitch – 7.5 m before the pixel structure disappears, 15 m before body copy reads cleanly. Because the cabinet divides into 8 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
Compared with the mainstream specs indoor LED display P4mm and P6mm, P5 indoor LED display still have its advantage in indoor LED screens, by right of suitable pixel pitch and brightness,
the vivid picture or video showing on the screen will hold on your eyes no matter you are standing at any angle. In addition, with high Performance/Cost Ratio, Vios P5mm led display screen make you have another option when you are comparing whit indoor LED display P4 and P6, in another words,


Where the P5 Indoor LED Display Screen is used
- Corporate offices – reception media walls and internal comms.
- Education – lecture theatres and campus wayfinding.
- Retail stores – promotional walls and window displays.
- Conference and hotel lobbies – welcome screens and event schedules.
Installation and service access
Indoor screens are typically wall-mounted on a bracket or recessed into a joinery frame. Because the viewing distance is short, we set brightness to 600-1200 nits and use a low-brightness calibration so the wall does not glare in a dim room.
A magnetic front-service module means the screen can sit flush against a finished wall. 5-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P5 Indoor LED Display Screen: frequently asked questions
Do you supply the steel structure and drawings?
Structure drawings and load calculations are included with the order; the steel itself is usually fabricated locally to save freight. We review the workshop drawing before it is cut.
How is the P5 Indoor LED Display Screen shipped, and what spare parts come with it?
Each 640×640 mm cabinet is crated on its edge in a plywood case with foam corners, and the carton list matches the cabinet numbers on the layout drawing. A 2.56×1.92 m wall ships in roughly 4 cases plus one spares box.
Is the P5 Indoor LED Display Screen CE and RoHS certified?
CE and RoHS as standard, FCC on request, and IEC 60068 test reports for temperature, humidity and vibration on the cabinet.
What brightness do I need for this P5 Indoor LED Display Screen?
1,000 cd/m² is the factory setting, which suits most sites. Rule of thumb: shadowed facade 1,500, open plaza 5,000, direct afternoon sun 6,500+. Running higher than the site needs shortens LED life.
Request a price for the P5 Indoor LED Display Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Indoor Full Color LED Display range, and you can compare p4 indoor smd led screen, p3 led billboard. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.






