Product Detail
Sized for reception walls, retail and wayfinding, this P3 Indoor SMD LED Screen uses Kinglight LEDs at P3 inside a 640×480 mm die-cast aluminium cabinet, sealed to IP40 and calibrated to 2,000 cd/m². Leyarled has shipped this cabinet family since 2013 with a 3-year warranty and a 2-3% spare-module allowance in each case.


P3 Indoor SMD LED Screen: key features
- About 7.4 kg per cabinet, 217 W/m² average draw – power and structure can be sized from these two numbers before the layout is final.
- Kinglight LEDs on a die-cast aluminium cabinet – the lamp and cabinet pairing is what decides colour consistency after three years.
- Factory calibration before packing – each cabinet carries its own calibration file for field re-tuning.
- 34,080 pixels per cabinet (P3, 640×480 mm) – so a wall built from whole cabinets never needs a half-module filler.
P3 Indoor SMD LED Screen technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P3 (3 mm) |
| Module size | 320×160 mm |
| Module count | 6 per cabinet |
| Cabinet size | 640×480 mm |
| Resolution per cabinet | 213×160 px (34,080) |
| Brightness | 2,000 cd/m² (auto dimming) |
| Refresh rate | 3840 Hz |
| Scan mode | 1/16 |
| Protection | IP40 |
| LED lamp | Kinglight |
| Cabinet material | die-cast aluminium |
| Cabinet weight | about 7.4 kg (24 kg/m²) |
| Average power | about 217 W/m² |
| Viewing distance | 4.5 m minimum, 9 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P3 Indoor SMD LED Screen. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
To size this P3 Indoor SMD LED Screen, start from whole cabinets: a 4×3 build gives a 2.56×1.44 m screen, 852×480 pixels (0.41 MP), about 27 kg of cabinet and an average load near 800 W. Add one row and the same cabinet family gives 1.92 m height with no new tooling, which is why projects usually fix the wall size first and the pitch second.
Product details
The aging time exceeds 24 hours, the failure point rate is less than 0.0001, and the MTBF exceeds 10,000 hours. High-level aging testing and strict quality control system to ensure the highest quality and reasonable price.
The use of a durable and high-brightness high-quality plastic package package 3 in 1 LED SMD can ensure a large viewing angle, the horizontal viewing angle can reach 160°, and the vertical viewing angle can reach 160°. Within this range, the image has no distortion and no color cast at any angle, which can attract more viewers.


Where the P3 Indoor SMD LED Screen is used
- Retail stores – promotional walls and window displays.
- Conference and hotel lobbies – welcome screens and event schedules.
- Corporate offices – reception media walls and internal comms.
- Education – lecture theatres and campus wayfinding.
Installation and service access
Indoor screens are typically wall-mounted on a bracket or recessed into a joinery frame. Because the viewing distance is short, we set brightness to 600-1200 nits and use a low-brightness calibration so the wall does not glare in a dim room.
A magnetic front-service module means the screen can sit flush against a finished wall. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P3 Indoor SMD LED Screen: frequently asked questions
What brightness do I need for this P3 Indoor SMD LED Screen?
2,000 cd/m² is the factory setting, which suits most sites. Rule of thumb: shadowed facade 1,500, open plaza 5,000, direct afternoon sun 6,500+. Running higher than the site needs shortens LED life.
What are the payment and MOQ terms?
MOQ is one square metre; 30% deposit with the balance against the bill of lading, or an LC at sight for orders above USD 50,000.
Which control system does the P3 Indoor SMD LED Screen use?
NovaStar or ColorLight, both supplied or BYO. The screen accepts HDMI, DVI and SDI input through a video processor, and content can be scheduled per zone or per time slot.
Can I see this LED display running before I order?
We keep a 640×480 mm demo cabinet of the P3 build in the Shenzhen showroom and can shoot a video of it on request, including a camera pan at 3840 Hz to show the refresh behaviour.
Request a price for the P3 Indoor SMD LED Screen
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Indoor Full Color LED Display range, and you can compare p4 indoor led display screen, p0.93 indoor led display screen. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.







