Product Detail
For facade media and entrance signage, the P10 Outdoor RGB LED Display is the model we quote most often: 960×960 mm cabinets, P10 pitch, 7,000 cd/m², IP65 sealing and 1920-3840 Hz refresh. Factory-direct from our Shenzhen line, 7-12 working days for standard cabinets, spare modules in every carton.


P10 Outdoor RGB LED Display: key features
- Factory calibration before packing – brightness and colour bins are matched across cabinets so a 40 m² wall reads as one surface.
- 9,216 pixels per cabinet (P10, 960×960 mm) – so a wall built from whole cabinets never needs a half-module filler.
- NovaStar and ColorLight compatible control – the control path stays one card, one processor, one content source.
- IP65 sealed cabinet with pressure valve – the breathable valve equalises pressure so gaskets are not stressed.
P10 Outdoor RGB LED Display technical specification
| Parameter | Value |
|---|---|
| Pixel pitch | P10 (10 mm) |
| Module size | 320×160 mm |
| Module count | 18 per cabinet |
| Cabinet size | 960×960 mm |
| Resolution per cabinet | 96×96 px (9,216) |
| Brightness | 7,000 cd/m² (auto dimming) |
| Refresh rate | 1920-3840 Hz |
| Scan mode | 1/4 |
| Protection | IP65 |
| LED lamp | Epistar |
| Cabinet material | steel cabinet |
| Cabinet weight | about 30.4 kg (33 kg/m²) |
| Average power | about 280 W/m² |
| Viewing distance | 15 m minimum, 30 m comfortable |
| Lifespan | 100,000 hours |
| Warranty | 3 years |
The table shows the standard build for this P10 Outdoor RGB LED Display. Cabinet size, brightness and control system can be changed per project; the final datasheet is issued with the PI before production. Cabinets are tested against IEC 60068 for temperature, humidity and vibration.
How the numbers work on a real wall
The arithmetic behind this P10 Outdoor RGB LED Display is simple enough to check before you order: 960÷10 = 96 pixels across each cabinet and 960÷10 = 96 down, so six cabinets in a row resolve 576 pixels at 5.76 m wide. Viewing distance follows the pitch – 15 m before the pixel structure disappears, 30 m before body copy reads cleanly. Because the cabinet divides into 18 standard 320×160 mm modules, a replacement module is never a custom order.
Product details
High refresh rate, high brightness, and high contrast, make the screen without any delay and smear phenomenon under direct sunlight, ensuring the extremely high level of the vivid image of our LED display system.
The product has high reliability, uniform color saturation, high brightness, low power consumption, long service life, and wide viewing angle. It is widely used in many indoor places, such as exhibition halls, cafes, hotels, stages, etc.


Where the P10 Outdoor RGB LED Display is used
- Sport and event venues – score and sponsor boards.
- Building facades – permanent media walls on commercial buildings.
- Entrances and plazas – welcoming screens that run brand and wayfinding content.
- Car parks and petrol stations – high-brightness panels with automatic dimming.
Installation and service access
Outdoor cabinets are sealed to IP65 with a breathable membrane valve, so pressure changes do not pull moist air inside. The rear door, fan filter and cable glands are the three service points that need access, and all three are reachable from the maintenance walkway.
For coastal sites we apply an anti-corrosion coating to the cabinet and use stainless fixings. 3-year warranty on modules, power supplies and receiving cards; spare parts held in Shenzhen for five years after the order.
P10 Outdoor RGB LED Display: frequently asked questions
Can you put our brand on the P10 Outdoor RGB LED Display?
Silkscreen on the 960×960 mm cabinet, a branded carton and a custom manual are included from 50 m²; below that we print labels only, so the MOQ stays at one square metre.
Will this P10 Outdoor RGB LED Display survive a coastal or high-humidity site?
Yes, with the coastal option: epoxy coating on the cabinet, stainless screws, conformal-coated driver boards. Humidity above 85% year-round is the case where that option pays for itself.
What is the lead time for a P10 Outdoor RGB LED Display order?
Standard cabinets ship in 7-12 working days after the deposit clears; a full project with structure, control and commissioning takes 15-20 days. Custom cabinet sizes or curved frames add 3-5 days. We send a production photo set before the goods leave Shenzhen.
How many spare modules should I keep?
Budget 2-3% of modules plus one power supply per 20 cabinets. A spare module is a five-minute swap, so the stock is insurance against downtime, not a repair plan.
Request a price for the P10 Outdoor RGB LED Display
Send the screen size, viewing distance and project country, and our engineers return a layout drawing, a resolution map and a factory price within 24 hours. Similar models are listed under Advertising LED Screens range, and you can compare outdoor smd led screen, p8 outdoor led billboard. Direct contact goes through the contact page. When you compare quotations, ask every supplier for the module brand, the power-supply brand and the spare ratio in the carton – that is where prices usually differ.








